Results 1 to 5 of 5

Thread: Martin Threshold Draw Module Blocke

Hybrid View

  1. #1
    Junior Member
    Join Date
    Dec 2011
    Posts
    3
    Post Thanks / Like

    Default Martin Threshold Draw Module Blocke

    Hello all!

    I recently acquired a new Martin Threshold (70# model) for Christmas, and it came with a 30" draw. I want to adjust this to a 28" draw, and I have the appropriate modules to do so. However, when I went to unscrew the screw on the back of the cam to release only the module, the back screw was blocked by the limb. Any ideas as to how to get access to this screw so I can replace the module. The other screw came out just fine.

    Thank you

  2. #2
    Senior Member gravedigger's Avatar
    Join Date
    Jan 2011
    Location
    forest grove,oregon
    Posts
    3,761
    Post Thanks / Like

    Default

    welcomr to the forum.im a bit suprised no one chimed in,so here is a link with pics.it really is ez and you will have no trouble swaping it out.
    http://martinarchery.com/mtechforum/...My-Draw-Length

  3. #3
    Super Moderator Arrow Splitter's Avatar
    Join Date
    Oct 2010
    Location
    Gilmanton, NH, United States
    Posts
    3,649
    Post Thanks / Like

    Default

    Welcome to the forum.
    To change the module you can also use a bowpress in addition to the ways stated in the link gravedigger gave.

    A.S
    2011 Martin Firecat 400/NAP Apache Dropaway/Truglo Xtreme Sight/Custom 8" Stabilizer/Victory V6 Arrows
    2007 Martin Jaguar /Trophy Taker Dropaway/Extreme Sight/Custom 21" Stabilizer/Victory V6 Arrows
    Bow String Depot, Custom String Builders email us @ bowstringdepot@gmail.com

  4. #4
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,563
    Post Thanks / Like

    Default

    Wrap a zip tie around string and cable, pull tight enought to rotate the screw into a postion where you can get your allen wrench to the screw.
    http://eastoutfitter.tripod.com/index.html
    http://cascadianbowmen.com/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  5. #5
    Junior Member
    Join Date
    Dec 2011
    Posts
    3
    Post Thanks / Like

    Default

    Thank yall so much! That did the trick!

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •