Results 1 to 5 of 5

Thread: new arrow and weight

  1. #1
    Join Date
    Feb 2012
    Posts
    6

    Default new arrow and weight

    I'm going to buy new arrows for hunting. I'm shooting a 385 total grain gold tip with 85 grain Magnus buzz cuts. I shot a deer with this set up got a pass through. And a deer. Thought about maybe a little heavier arrow but not changeing my broadhead. Will this make my arrow too stiff and snap on impact. I'm shooting a cheetah 70 lb draw

  2. #2
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,155

    Default

    Hard to awnser without more information, ( your draw length, the arrow you want to shoot ), but generally speaking a stiffer arrow will not snap on impact.
    http://eastoutfitter.tripod.com/index.html
    http://cascadianbowmen.com/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  3. #3
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    10,779

    Default

    Shooting a heavier arrow has nothing to do with the stiffness of it. Stiffness is a measurement of spine and is totally independent of an arrows weight, although stiffer arrows are normally heavier than less stiff arrows. Just how much heavier do you want? You're getting passthroughs now. A heavier arrow would carry more momentum and more potential penetration, but how much farther into the ground do you need your arrow to go to kill a deer? If you have something that works well now I wouldn't see a need to change.

    Check arrow manufacturers' websites to see what they offer. Determine the proper spine (stiffness) for your seetup and then compare what arrows they offer in that spine. I'm sure they all make different weight arrows in a given spine deflection, determined by GPI (grains per inch).

    Frankly, any properly spined arrow for a 70# bow is way more than enough for any deer sized animal. Back in the 70's I hunted with aluminum arrows shot out of a 39# bow and got pass throughs. And those arrows were only shooting about 190 fps.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin/Rytera Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  4. #4
    Join Date
    Mar 2010
    Location
    Southeast Kansas
    Posts
    1,528

    Default

    Since you are already getting pass throughs, the only thing a heavier arrow would really do for you is quiet the bow down a little. It only takes 55-65 ft.#s of KE to take on animals as big as moose, elk, etc. Deer are more in the 40-55 ft. # range. Heavier arrows will also make you increase the distance between your sight pins, as it slows down the arrow. Personally, I think you are in the right zone with the setup you currently have.
    2006 Rytera Bullet X 60#---2008 Moab 70#
    2008/12 Firecat 60#--- 2010 Warthog 70#
    2010/2012 Alien X 65# 2011 Onzas 60 & 70#
    2009 Warthog 70#---2009 Firehawk 70#
    2010 Strother SR-71 65# & 2012 Strother Rush 65#


    I hunt, therefore I eat. lol

  5. #5
    Join Date
    Feb 2012
    Posts
    6

    Default thanks

    Thanks guys. I'm shooting gtip hunter xt 28 inch draw at 70 pounds with a ripcord rest and 4 inch Vanes total arrow weight 385.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •