Results 1 to 10 of 24

Thread: Alien X Draw Mod/Length

Hybrid View

  1. #1
    Senior Member droppixel's Avatar
    Join Date
    Apr 2011
    Location
    Plano, IL
    Posts
    1,618
    Post Thanks / Like

    Default Alien X Draw Mod/Length

    So the Alien came today. For the owners, got a question on the rotating mods. The top is set in the #4 hole and the bottom is #5 - that seemed off to me, but I don't know a lot about these cams, etc. I'm a 29" draw. Haven't had a chance to really go through it much yet, I'll be putting a new set of strings on it, so I don't want to get too deep into tuning it.

    IMAG0132.jpgIMAG0134.jpg


    I did get it set up and took a few shots. Have to say there is a night and day difference btw this and my Cheetah in terms of weight. The X feels pretty awesome. I'm not totally sold on the QAD yet, I like the rest but it definitely needs some felt or moleskin on the launcher. I'm thinking I'll give it a chance, but kinda think I want to go with a TT Smackdown or a Limbdriver. Same with the sight, have a nice TruGlo sight mounted right now that the previous owner sent, but think I'm going to put a TR Vertical Pin on it.
    2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
    REAL AVID Field Staff / Bucks and Beards Scents Field Staff

  2. #2
    Senior Member
    Join Date
    Jun 2011
    Location
    Nth Somerset, UK
    Posts
    255
    Post Thanks / Like

    Default

    Both modules should be set to exactly the same number.

    I had the same thing with my first Shadowcat. Unfortunately, the seller was not a nice person, and had changed the setting in order to cover up a fault with the bow.

    Hopefully, in this case it is just a set up mistake.
    Dedicated Finger Shooter.

    Shadowcat(s) with Barnsdale limbs: Davis The System, Free Flyte rest.

  3. #3
    Senior Member Speedykills's Avatar
    Join Date
    Feb 2011
    Location
    Eastern Oklahoma
    Posts
    967
    Post Thanks / Like

    Default

    Yep both modules need to be on the same number and you will have to re adjust the draw stop when ever you change draw length.You need to set the top cam module to #5 same as bottom to be at 29" draw,same as mine........Now just need to get ya in Alien mafia.............
    Last edited by Speedykills; 02-17-2012 at 02:25 AM.

  4. #4
    Senior Member droppixel's Avatar
    Join Date
    Apr 2011
    Location
    Plano, IL
    Posts
    1,618
    Post Thanks / Like

    Default

    Awesome, I'll get that changed tonight for sure. I know of the mafia and I think I know who I need to message for the invite. Yeah, I don't think there is anything wrong with the bow and hopefully that isn't the case in a cover up. The guy has been very pleasant to work with, so I'm going to give him the benefit of the doubt there. He did say he was at the shop getting things changed around, so that could have been a miss there.

    I do need to give everything a good look still, saw there was a slightly rough spot on one of the cams, the serving was showing a little wear. Also at the ccs he doesn't have the cables served, so those are showing some wear. I'm assuming those should have a serving as they go through the roller correct?
    2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
    REAL AVID Field Staff / Bucks and Beards Scents Field Staff

  5. #5
    Senior Member
    Join Date
    Jan 2011
    Location
    SW OK
    Posts
    1,480
    Post Thanks / Like

    Default

    It could be the two different angles of that the pictures were taken at but the cams don't seem to be timed the same. The gap between the string post and the string should be very close to the same for both sides. In the second picture it looks to be almost touching but that could just be the angle.
    Firecat 400

  6. #6
    Senior Member Speedykills's Avatar
    Join Date
    Feb 2011
    Location
    Eastern Oklahoma
    Posts
    967
    Post Thanks / Like

    Default

    Quote Originally Posted by droppixel View Post
    Awesome, I'll get that changed tonight for sure. I know of the mafia and I think I know who I need to message for the invite. Yeah, I don't think there is anything wrong with the bow and hopefully that isn't the case in a cover up. The guy has been very pleasant to work with, so I'm going to give him the benefit of the doubt there. He did say he was at the shop getting things changed around, so that could have been a miss there.

    I do need to give everything a good look still, saw there was a slightly rough spot on one of the cams, the serving was showing a little wear. Also at the ccs he doesn't have the cables served, so those are showing some wear. I'm assuming those should have a serving as they go through the roller correct?
    The stock string has that clear serving on mine,seems to do a good job,im sure it wouldnt be to hard to do that.And it does look like your cams need timing as stated above.

  7. #7
    Senior Member droppixel's Avatar
    Join Date
    Apr 2011
    Location
    Plano, IL
    Posts
    1,618
    Post Thanks / Like

    Default

    I have no doubt that things could be or are out of whack with with as far as timing goes. I'll get more straight on shots tonight to see. I haven't done much dual cam tuning, so this will be a learning process but one I'm definitely excited about.
    2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
    REAL AVID Field Staff / Bucks and Beards Scents Field Staff

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •