It's the shorter of the two arms, or the standard arm. The rest is mounted is in line with the Berger holes as specified for both the LD and the HDX I have. I was holding the arm in the full draw position as the at rest position is a little lower and the yoke cable pulls it up into the full draw position. Yes it is shy of vertical but this would only affect clearance issues which I don't have. Past vertical or leaning back would be very bad juju as this would raise the arrow on release instead of a pure drop and all kinds of nasty stuff can happen. Very bad juju! The more vertical arm would only raise the nock proportionally with the rest, right?
Last edited by dugout; 03-15-2012 at 12:30 PM.