Well

[TEN RING]

after the failed attempt with the tilt tamer I stop and got some 3/8 rod and bent my own cable guard looks good I just bent it a little at a time till I got were I wanted it,if anybody wants the measurement they are the rod 7-3/8 long start the bend 3.5" from the rise side then put were you like, ps do a little at a time

[droppixel]

Interesting, keep us posted on how you think it performs.

[TEN RING]

The day I made it we had 25 mph wind Not a good test Got out today my sight pin moved closer to center I still want to test other arrows like my 400's to see if it helped tomorrows another day to much to do today

[TEN RING]

Update want this morning try the 400's but the 350's still win, the bow shot good before now it's a real tack driver

[wscywabbit]

nice, redneck engineering wins again!

[TEN RING]

I R A redneck

[TEN RING]

after the failed attempt with the tilt tamer I stop and got some 3/8 rod and bent my own cable guard looks good I just bent it a little at a time till I got were I wanted it,if anybody wants the measurement they are the rod 7-3/8 long start the bend 3.5" from the rise side then put were you like, ps do a little at a time

I have now bent a cable rod for my onza3 If have not tryed it yet you real will like the differants If you don't want to make one there is a company that is now selling them for about $17

[Durandal]

Noob alert: What is the theory behind bedind the rod?

thanks!

[droppixel]

Noob alert: What is the theory behind bedind the rod?

thanks!

to bring the cables closing to the center of the bow at full draw to help reduce cam lean.

[Spiker]