Results 1 to 3 of 3

Thread: Center Serving

  1. #1
    Member
    Join Date
    Jul 2011
    Location
    New Mexico
    Posts
    67
    Post Thanks / Like

    Default Center Serving

    Hey everyone,
    I am having problems with my center serving just below the nocking point. The serving tends to twist and move. Sometimes it works loose and even doubles over on it self. It gets to the point that it slides down and bunches up. I can move it back and shoot a few more arrows and its back to the same problem again. I tried to have a bow string made by someone else and it did it on that string as well, however it took more arrows before it happen.
    If I had shot thousands or even hundreds of arrows I could accept it. But it does this even after 50 or 60 arrows. I have tried different tensions on my serving jig. I have been told that my center serving is wound to tight but when I try looser the problem gets worse. I have also tried different sizes of nocking points. I was wondering if maybe the twist of the bow string might have something to do with it or maybe the size of serving. Maybe the arrow nocks are too tight on the string, however I do not think they are. It would be greatly appreciated if anyone has any ideas how to fix this problem. I would like to continue making my own strings but I need to fix this problem.
    Last edited by shaverd; 04-06-2012 at 05:22 AM.

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,622
    Post Thanks / Like

    Default

    Talk to Hutch on here. He makes strings so knows all about this stuff. My guess is that you're not serving tight enough. I know when I redo mine I have to hold the string close to where I'm serving to keep it from twisting as I go. Basically, tight as a bulls azz. The only problems I ever encounter is a slight serving separation right under the arrow nock, aout one thread width, but I use a rope release so this creates a very sharp bend at that point. I have only ever used older braided fastflight and rarely have any problems with it kinking, doubling over itself or anything else, and only use about a 4" center serving.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,786
    Post Thanks / Like

    Default

    Barry nailed it right on the head too loose. Questions for you what type of center serving are you using? Are you serving it with the twist in the string?

    Put the bottom of the bow to your left serve it towards the right (to the top of the bow). Serve it with the serving tool towards you. Snug it tight enough that the serving tool will not move freely but not so the string twist.


    Hutch
    Last edited by Hutch~n~Son Archery; 04-07-2012 at 02:31 AM.
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •