Firehawk Cam Issue

[appsfan]

Help! My "new" 2009 Firehawk has a maximum draw length of 29 inches and Martin has NO long draw Cat Cam modules. (Martin Part #3015) The modules have the numbers 8 & 9 on them and were made in 2008 and 2009 for the Firehawk and Firecat. Anyone out there with a spare set they can part with?

[tvs]

Help! My "new" 2009 Firehawk has a maximum draw length of 29 inches and Martin has NO long draw Cat Cam modules. (Martin Part #3015) The modules have the numbers 8 & 9 on them and were made in 2008 and 2009 for the Firehawk and Firecat. Anyone out there with a spare set they can part with?

have cams but have scars to need to know if roll over tofar you may have problems

[appsfan]

have cams but have scars to need to know if roll over tofar you may have problems

Thanks for the offer, but I don't want to risk the damage to a new bow. The bow will also remain in a full draw position for extended times which may cause more of a problem. Maybe some new ones will show up.

[tvs]

Thanks for the offer, but I don't want to risk the damage to a new bow. The bow will also remain in a full draw position for extended times which may cause more of a problem. Maybe some new ones will show up.

you need just the modules. i have new one in stock. it just that I think the cat cam roll over to far and can allmost lock. Me firecat did and had to be let down. this caused the sting to break and hit me in the arm. this is just a head up. martin fixed the bow for free

[appsfan]

you need just the modules. i have new one in stock. it just that I think the cat cam roll over to far and can allmost lock. Me firecat did and had to be let down. this caused the sting to break and hit me in the arm. this is just a head up. martin fixed the bow for free

How much for the modules?

[bfisher]

you need just the modules. i have new one in stock. it just that I think the cat cam roll over to far and can allmost lock. Me firecat did and had to be let down. this caused the sting to break and hit me in the arm. this is just a head up. martin fixed the bow for free

Did you have the draw stop installed? This is a must.

[appsfan]

Did you have the draw stop installed? This is a must.

This is the first compound bow I have owned for 20 years and although I know what a draw stop is, I do not know where it would be in looking at the Cat cams. Could you send a photo to show me or I could post one of my bow?

After further examination and research, I have a rubber coated screw in post which stops the cam rotation so I assume this is the stop. It is on only one of the cams.

[appsfan]

Forget about the module as I accidently damaged the bottom cam on the bow. Martin wants $110.00 for a new cam so I am trying to locate a new or used bottom Cat2 cam. If you have one or if someone has one out there at a reasonable price, please respond.