Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Pantera Letoff Difference

  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Ulysses KS
    Posts
    40
    Post Thanks / Like

    Default Pantera Letoff Difference

    Hi again! My brother and each got 2011 panteras recently. The question i have is why would his have great letoff and mine suck on letoff? My brothers letoff is near 80%. But mine is prob somewere around 60%. Any thoughts? Also the bow i got was the one at cabelas that had the rest on it for test shooting. My brothers had never been shot as far as we know.
    2011 Pantera 55-70#dw 28"dl

  2. #2
    Senior Member Speedykills's Avatar
    Join Date
    Feb 2011
    Location
    Eastern Oklahoma
    Posts
    959
    Post Thanks / Like

    Default

    Not sure what cam system they have but have the draw stops been adjusted after draw length changes made!draw stops control letoff.

  3. #3
    Member
    Join Date
    Apr 2012
    Location
    Ulysses KS
    Posts
    40
    Post Thanks / Like

    Default

    Yes SK the draw stops have been adjusted. I think they are the acutrak cam. I have tryed everything i can think of (which isnt much) to correct it.
    2011 Pantera 55-70#dw 28"dl

  4. #4
    Senior Member Money Man's Avatar
    Join Date
    Oct 2010
    Location
    Knox, NY
    Posts
    506
    Post Thanks / Like

    Default

    Are they both set to the same draw weight?
    2012 Alien X

  5. #5
    Member
    Join Date
    Apr 2012
    Location
    Ulysses KS
    Posts
    40
    Post Thanks / Like

    Default

    Yes they are both set to the same draw weight to within 2#
    2011 Pantera 55-70#dw 28"dl

  6. #6
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,540
    Post Thanks / Like

    Default

    Are they both set for the same draw length? You say the draw stop is set OK, but make sure the bow has the right module. It could be that it has a module for a longer draw length. In this case the draw stop will stop the draw short of the module's draw length.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  7. #7
    Member
    Join Date
    Apr 2012
    Location
    Ulysses KS
    Posts
    40
    Post Thanks / Like

    Default

    They are bot set to the same draw lenght 27". i have adjusted the draw stop both ways and nothing helps.
    2011 Pantera 55-70#dw 28"dl

  8. #8
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,757
    Post Thanks / Like

    Default

    One way to tell is to loosen the draw stop. Draw the bow back till the string sets in the module then set the draw stop. Then measure the draw length. They should be very close if not the same. Remember do not over draw the module, which is easy to do. Draw it back with some one watching the string when it seats in the groove set the stop. The draw stop ends up being your back wall and the module ends up being your draw length.



    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  9. #9
    Member
    Join Date
    Apr 2012
    Location
    Ulysses KS
    Posts
    40
    Post Thanks / Like

    Default

    I have set the draw stop to where it does over draw the module and nowere in that draw does it come to correct letoff.
    2011 Pantera 55-70#dw 28"dl

  10. #10
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,757
    Post Thanks / Like

    Default

    Then I would call C/S @ Martin and see if there is something we are missing.




    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •