Good pics to work with. Good job. Now let's get into the meat of this.
Looking at the modules the top cam is just a little bit behind the bottom one at reaching full draw. I would suggest using a bow press or using the limb bolts to slacken the rigging and take on turn out of the cable attached to the outer peg on the top cam. Depending on how tight they are twisted up maybe a half turn would suffice, but I'm guessing a full turn.
Next you could move the draw stop closer to the + end. Not much here maybe 1/16". This will give youa touch more letoff. It will also give a little more valley to play with. Note that it's also going to make the draw length just a tad longer so if you're liking the draw as is and like the letoff you can eliminate this step.
From the pics this is what I see. The bow is very close to being right, but just needs a tweak
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
PSAA Life member, UBP Life member
PADI AOW Diver