Cable doesn't line up with module when bow is drawn

[Arrow Splitter]

Don't worry about the axle sliding back and forth. This is fairly normal. Th cam bearing floats on the axle and can only move within the limb forks. Worry if there is play between the limb forks. If it bothers you you can just as a thin nylon washer between the limb and E-clip, but it doesn't hurt anything as is.

OK, thanks.


I've got to go to work, but will get back to working on my bow tonight or tomorrow.

A.S

[Arrow Splitter]

I did as gstudt suggested, but when I put the limbs back on I couldn't tighten the top one very far. I had this problem when I took the limbs off the last time.

I removed the bolt and pulled out the barrel nut that's in riser, and the threads were a little messed up. I'm not sure why, since I hardly ever remove the bolts.
Anyway, I ran a tap through it, and that allowed the bolt to go through again, but I can't get it to tighten up with the bolt through the limb.

So I'm going to need another barrel nut to replace that one. I'm probably going to contact joelc, unless someone else has the part I need.

A.S

[bfisher]

Man, you just can't buy any luck can you. I'd replace the nut and the bolt. Call Joel.

[Simple Life]

I have a nut and bolt if you need it Brad.It is out of a 01 but should be the same.Just let me know and I will send it out.

[joelc]

Just send me an email and I'll send you the darn bolt...barrel nuts too

[Arrow Splitter]

Man, you just can't buy any luck can you. I'd replace the nut and the bolt. Call Joel.

LOL No need now.

I have a nut and bolt if you need it Brad.It is out of a 01 but should be the same.Just let me know and I will send it out.

Thanks, but I guess I'm all set now.

Just send me an email and I'll send you the darn bolt...barrel nuts too

Thanks, will do.

A.S

[Hutch~n~Son Archery]

Just send me an email and I'll send you the darn bolt...barrel nuts too

Thanks joelc! now maybe he will be ready for hunting this year.








Hutch

[Arrow Splitter]

OK, as soon as my parts come I'll let you guys know if the other problem is solved.

A.S