Results 1 to 10 of 19

Thread: Easton Carbon Injexion Arrows

Hybrid View

  1. #1
    Junior Member
    Join Date
    May 2012
    Location
    Kenai, Alaska
    Posts
    13
    Post Thanks / Like

    Default Easton Carbon Injexion Arrows

    hello all this will be my first post, about 3m ago i bought a 2011 Martin Silencer, when i brought it home the ATA was long, so i twisted the cables and its now perfect. i shoot with a release, and with the limb bolts cranked and the added twists im pullin 69lbs, with a 30in draw. i was shooting GoldTip Velocity arrows with 125gr points 300 spine 30.75in about 430gr total, and spent hrs and hrs tuning shooting hundreds of shots, only to have my arrow flight aggrivate me enough to quit for the night. I followed the Easton guide and it really helped straighten out my arrow, i mean i would get one straight flier and then a few that would fishtail, i got it to a minimum but still i couldt figure it out, so i ruined 4 of my half dozen arrows hitting the nocks so i decided to buy new arrows, i read about the Micro OD carbon injexion arrows, kinda spendy. so i go them and had them cut to 30.5in for a total wieght of 445gr give take. and my first shot i was so happy with my setup, the arrow shot so straight, haha the only thing is that the micro diameter arrow made me have to change the nock point and sight elevation. they have a 330 spine and have 100gr points, I would recommend the buy if you can afford them, im not sure if the other arrows were the reason for the poor flight or form some of the time, but these new ones have made me enjoy my practice alot more and they are very accurate.
    This is my second martin bow, the first was a 2011 pantera that ended up with a cracked limb after about two weeks of owning it, but i gave martin another go and traded up to the silencer. i have the ripcord code red rest and a truglo micro adjust extreme 5pin sight

  2. #2
    Senior Member TEN RING's Avatar
    Join Date
    Dec 2011
    Location
    western PA
    Posts
    840
    Post Thanks / Like

    Default

    First off welcome to the forum, sometime you just fined that a differant arrow is all you need everyone is differant what works for one guy may not work for another
    MARTIN BENGAL
    THE NEED FOR SPEED
    WALMART PRO STAFF SHOOTER

  3. #3
    Junior Member
    Join Date
    May 2012
    Location
    Kenai, Alaska
    Posts
    13
    Post Thanks / Like

    Default

    thanks for the welcoming
    i have sat down many times looking at this forum getting ready to post questions about why my bow wasnt shooting up to par but it ended up that i was always pist cause i would make all these adjustments and shoot at least 50 shots a day making micro adjustments to no end and then wouldnt want to post anything haha
    would you say that the arrows that i chose are right for my setup? easton doesnt list my arrow length for the poundage of my bow, although it seems to work very well at this time.

  4. #4
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,544
    Post Thanks / Like

    Default

    Hey Chevy, glad to see you posting now. I thought maybe you got lost. Anyway, welcome to the forums.

    You wrote a nice little review for a first post. Glad you like the Silencer and have it fianlly set up the way you like it. You did ask whether we think you fiannly have the right arrows. I would say that it's not importsant what we think or even what some computer program would suggest. The proof is always in the shooting. And if it's a hunting setup then shooting with your broadheads will be the final test.

    I would have normally suggested a 300 spine for you, but using my own experience I've found that I can shoot a softer spine than normal with the Cat/Nitro cam system. I know why, but that's info for another discussion in the future. Anyway, I've never checked the actual spine of the Injection arrows so will accept your figure that yours spine at 330. Do you know that's almost 340? I'll just bet that you could have been shooting the Gold Tip in a 340 spine and got them to work. That's water under the dam though. You just enjoy what you have now.

    Hope you stick around here and yak it up with the other guys. It's been a little slow lately, but any questions you may have or suggestions other may use are always welcome.

    Barry
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  5. #5
    Senior Member Speedykills's Avatar
    Join Date
    Feb 2011
    Location
    Eastern Oklahoma
    Posts
    965
    Post Thanks / Like

    Default

    I went through a similair situation with my arrows,long story short mybow preferes 4" vanes over shorter ones......or it might be sycological who knows.

  6. #6
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,752
    Post Thanks / Like

    Default

    If you're happy with the flight and they'll fly good with broadheads on 'em, they must be the right arrow for your setup. Welcome to the forum.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •