Results 1 to 2 of 2

Thread: New Bengal, can I change plastic mods myself?

  1. #1
    Oregon Rob
    Guest

    Default New Bengal, can I change plastic mods myself?

    The book that came with my new bengal explains quite a bit, but not how to change plastic modules. Can I change them myself, if so how do they install and do you remove existing ones? Also, which one would I use for 29" Draw?

    Thanks,

    Rob

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,622
    Post Thanks / Like

    Default

    There are two coutersunk set-screws holding the module to the cam. Remove them with the appropriate size allen head wrench. Sometimes one of the screws is hidden behind the limb fork. You can just squeeze the cable to get it out where you can get the wrench on it. It depends on how the cam is positioned, when I do this I sometimes just wrap a zip-tie around the cable and riser to hold it in place while making the swap.

    To install the new module just do the procedure in reverse. Then, if you use a zip-tie, hold the cable and cut the zip-tie with a scissor.

    Job done.

    If you want to make the job a little easier you can back some weight off the limb bolts. Up to you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •