Results 1 to 3 of 3

Thread: Howatt Hunter.. help ID the wood.

  1. #1
    Junior Member
    Join Date
    Mar 2012
    Posts
    14
    Post Thanks / Like

    Default Howatt Hunter.. help ID the wood.

    serial HH4909



    Wanted to Buy:

    Damon Howatt Martin HUNTER amo 62" and 45# RH
    used but not abused.

    a cheap target bow atleast 62" and 35# maybe 30# RH

  2. #2
    Senior Member
    Join Date
    Jul 2011
    Location
    Washington
    Posts
    1,866
    Post Thanks / Like

    Default

    This is what i read from the DH site.


    Riser and Limb Materials
    Riser woods are Shedua with a broad beam of Bubinga through the center, outlined with hard maple. Limbs made of Eastern Hard Maple laminations and black fiberglass, with black fiberglass overlays.

  3. #3
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,790
    Post Thanks / Like

    Default

    If you want to know for sure, you can go to this site, Stickbow.com's Leatherwall, and ask the man who made that bow, Larry Hatfield. Here's a post about the end of the Hatfield takedown, Larry posts in it several times. Join and send him a pm, and he can tell you what year that bow was built. I think that Simon is correct, its Shedula.

    http://leatherwall.bowsite.com/TF/lw...=12&CATEGORY=9
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •