Results 1 to 10 of 10

Thread: Lowering limb poundage before pressing martin bows

Hybrid View

  1. #1
    Member
    Join Date
    Jan 2012
    Posts
    85
    Post Thanks / Like

    Default Lowering limb poundage before pressing martin bows

    I got my first press and will attempt to adjust my peep alignment....the guy i bought the press from said to check with the manufacturer on how to press and that some bows may need you to decrease the poundage...can anyone tell me if you need to do this with my onza3 ...the manual doesnt say anthing...have the bow on 60# now

  2. #2
    String builder/ Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,906
    Post Thanks / Like

    Default

    First thing you do know you don't need a bow press with a martin. If you knew that then next step. It is good practice to lower poundage. But that being said I don't always when adjusting the peep. It is simpler to adjust when at the correct shooting weight.





    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  3. #3
    Member
    Join Date
    Jan 2012
    Posts
    85
    Post Thanks / Like

    Default

    yeah, i knew that you could just lower the limbs, but that takes too long and i have hoyts too

    about adjust the peep..how many turns on the top cam could you go before timing gets messed up...my peep is about 45 degress facing to the left so i loosened the string at the top one full turn...it seems closer but not dead centered yet...thinking of trying one more 1/2 turn

  4. #4
    Junior Member
    Join Date
    Sep 2011
    Location
    western ny
    Posts
    26
    Post Thanks / Like

    Default

    Your timing will not change by adding/subtracting twists in string, just cables. ur cables drive the cams. if this is ur first martin, now that u have a press, do yourself a favor and take the strings and cables off and measure them. u can trust manufacturers all u want but always verify.

  5. #5
    Member
    Join Date
    Jan 2012
    Posts
    85
    Post Thanks / Like

    Default

    good to know...learning something new every day....is there anything you can do when a string needs a quarter turn to align the peep....subtracting one more 1/2 twist puts my peep a little off the opposite side....guess this is where you adjust it with the d loop?

  6. #6
    Senior Member daiwateampenn's Avatar
    Join Date
    Apr 2012
    Location
    Miri, Borneo
    Posts
    309
    Post Thanks / Like

    Default

    Quote Originally Posted by rdhj View Post
    good to know...learning something new every day....is there anything you can do when a string needs a quarter turn to align the peep....subtracting one more 1/2 twist puts my peep a little off the opposite side....guess this is where you adjust it with the d loop?

    well i no expert in tie peep or setting the peep dead center. but i still able to get my peep dead center, after hours or experiment, especially if your bow is not shoot at max out all the time.
    This is wat i did. i try add 1/2 on top, if its still not center. i try subtract 1/2 earlier on. and add at the bottom string. Well, it does work out on me. u can give a try, and im sure some other bro will advice you on this. and yes, the d-loop have to be consistant with the peep, else, your peep will end up side way at full draw.

    happy shooting.
    Bowless..... shopping for one now, Sureloc Challenger + Viper Scope, Trophy Ridge Revolution, GoldTIP + Blazer Vane + Accunocks, Home Made Front Stab 28", and Side Stab 11", Carter 2 Special.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •