2009 Alien X Manual

[wannawhitetail]

Is there one online? Thank you..

[Speedykills]

http://www.rytera.com/2012/media.php

[wannawhitetail]

Thank you. Guess I was looking for '09 specific, but the '11 will work.

[Ehunter]

Might be able to find it in the older Martin specs if you look on their site.

[Spiker]

Thank you. Guess I was looking for '09 specific, but the '11 will work.

There is no difference between the '09 - '12 Alien X as far as spec's/tuning goes, and there has never been a manual specific to the Alien X or Rytera.
Just the generic Martin manual.

[bfisher]

Spiker is right. There is no difference between the Hybrix cam and the Nitro cam. Just the name.

[EnglishKev]

Thank you. Guess I was looking for '09 specific, but the '11 will work.

If you really want the 2009 version (nice picture of Laura on the front ), pm me with an email address and I send you a pdf copy.

Kev

[wannawhitetail]

Thank you for the replys and explanations. I picked up a new '09 from a dealer, shooting well. When I began peep install, I noticed some abrasion to the serving on the cable. The module on the upper cam had a sharp edge, not knife sharp, but enough to cause issues as the cable moved into position. Mods should be arriving in Walla Walla today, hopefully by the end of the week it will be up and running again.

This does have the barnsdale limbs, so probably an earlier model.

[Hutch~n~Son Archery]

Thank you for the replys and explanations. I picked up a new '09 from a dealer, shooting well. When I began peep install, I noticed some abrasion to the serving on the cable. The module on the upper cam had a sharp edge, not knife sharp, but enough to cause issues as the cable moved into position. Mods should be arriving in Walla Walla today, hopefully by the end of the week it will be up and running again.

This does have the barnsdale limbs, so probably an earlier model.

Good deal nice bow and you are well on you way to having some great fun!




Hutch

[elkslayer4x5]

Thank you for the replys and explanations. I picked up a new '09 from a dealer, shooting well. When I began peep install, I noticed some abrasion to the serving on the cable. The module on the upper cam had a sharp edge, not knife sharp, but enough to cause issues as the cable moved into position. Mods should be arriving in Walla Walla today, hopefully by the end of the week it will be up and running again.

This does have the barnsdale limbs, so probably an earlier model.

With the Barnsdale limbs, it probally is a later model as the 09 model year was when Martin had a problem with their in house limbs, pre PowerTuff limbs, so Martin installed Barnsdale limbs untill they got the limb situation solved.