Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 2009 Alien X Manual

  1. #1
    Member
    Join Date
    Oct 2011
    Location
    Wisconsin
    Posts
    85
    Post Thanks / Like

    Default 2009 Alien X Manual

    Is there one online? Thank you..

  2. #2
    Senior Member Speedykills's Avatar
    Join Date
    Feb 2011
    Location
    Eastern Oklahoma
    Posts
    972
    Post Thanks / Like

  3. #3
    Member
    Join Date
    Oct 2011
    Location
    Wisconsin
    Posts
    85
    Post Thanks / Like

    Default

    Thank you. Guess I was looking for '09 specific, but the '11 will work.

  4. #4
    Senior Member Ehunter's Avatar
    Join Date
    Mar 2010
    Location
    Southeast Kansas
    Posts
    1,755
    Post Thanks / Like

    Default

    Might be able to find it in the older Martin specs if you look on their site.
    2006 Rytera Bullet X 60#---2008 Moab 70#
    2008/12 Firecat 60#--- 2010 Warthog 70#
    2009 Warthog 70#---2009-10-12? Warthog Frankenbow with Nitrous B
    2010 Strother SR-71 65# & 2012 Strother Rush 65#
    2012 Strother SX Rush 60# & 2011 Strother Infinity 70#
    BSD strings and cables

    Yeah, I know I'm grumpy and opinionated.

  5. #5
    Senior Member
    Join Date
    May 2009
    Location
    Colorado
    Posts
    1,695
    Post Thanks / Like

    Default

    Quote Originally Posted by wannawhitetail View Post
    Thank you. Guess I was looking for '09 specific, but the '11 will work.
    There is no difference between the '09 - '12 Alien X as far as spec's/tuning goes, and there has never been a manual specific to the Alien X or Rytera.
    Just the generic Martin manual.

  6. #6
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,551
    Post Thanks / Like

    Default

    Spiker is right. There is no difference between the Hybrix cam and the Nitro cam. Just the name.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  7. #7
    Senior Member EnglishKev's Avatar
    Join Date
    Mar 2011
    Location
    Devon, England
    Posts
    103
    Post Thanks / Like

    Default

    Quote Originally Posted by wannawhitetail View Post
    Thank you. Guess I was looking for '09 specific, but the '11 will work.
    If you really want the 2009 version (nice picture of Laura on the front ), pm me with an email address and I send you a pdf copy.

    Kev
    2009 AlienX
    2009 AlienX (not a misprint, I have two)
    2010 AlienX
    I have other bows as well

  8. #8
    Member
    Join Date
    Oct 2011
    Location
    Wisconsin
    Posts
    85
    Post Thanks / Like

    Default

    Thank you for the replys and explanations. I picked up a new '09 from a dealer, shooting well. When I began peep install, I noticed some abrasion to the serving on the cable. The module on the upper cam had a sharp edge, not knife sharp, but enough to cause issues as the cable moved into position. Mods should be arriving in Walla Walla today, hopefully by the end of the week it will be up and running again.

    This does have the barnsdale limbs, so probably an earlier model.

  9. #9
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,756
    Post Thanks / Like

    Default

    Quote Originally Posted by wannawhitetail View Post
    Thank you for the replys and explanations. I picked up a new '09 from a dealer, shooting well. When I began peep install, I noticed some abrasion to the serving on the cable. The module on the upper cam had a sharp edge, not knife sharp, but enough to cause issues as the cable moved into position. Mods should be arriving in Walla Walla today, hopefully by the end of the week it will be up and running again.

    This does have the barnsdale limbs, so probably an earlier model.
    Good deal nice bow and you are well on you way to having some great fun!




    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  10. #10
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,770
    Post Thanks / Like

    Default

    Quote Originally Posted by wannawhitetail View Post
    Thank you for the replys and explanations. I picked up a new '09 from a dealer, shooting well. When I began peep install, I noticed some abrasion to the serving on the cable. The module on the upper cam had a sharp edge, not knife sharp, but enough to cause issues as the cable moved into position. Mods should be arriving in Walla Walla today, hopefully by the end of the week it will be up and running again.

    This does have the barnsdale limbs, so probably an earlier model.
    With the Barnsdale limbs, it probally is a later model as the 09 model year was when Martin had a problem with their in house limbs, pre PowerTuff limbs, so Martin installed Barnsdale limbs untill they got the limb situation solved.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •