Results 1 to 10 of 13

Thread: Well having some issues....tuning

Hybrid View

  1. #1
    Senior Member
    Join Date
    Nov 2011
    Location
    Camas Washington
    Posts
    145
    Post Thanks / Like

    Default Well having some issues....tuning

    So I have a Alien Z RH 60 lber. I have been struggling to get it paper tuned and to get it broadheaded tuned for hunting season. I was using 350 trophy ridge crushes arrows cut a 29 in. They were tearing tail left everytime and could only get a slight tear the other way if I adjusted the rest all the way towards the riser. to looking down from the top of the bow the arrow is going towards the riser. so I adjusted the wt down to 50 lbs and got great flight not perfect but great. wanted to get it closer to 60 lbs so I bought some 300 spine arrows. now it shoots broadheads good at 60 lbs but the arrow is still going towards the riser. Some on here have said the center shot needs to be 15/16 but mine is more like 7/8 or just under it. Anythoughts on why?? I have 8 days until elk season so will be looking for ideas after sept?? Maybe swap limbs??

  2. #2
    Senior Member TEN RING's Avatar
    Join Date
    Dec 2011
    Location
    western PA
    Posts
    858
    Post Thanks / Like

    Default

    what arrow rest are you useing
    MARTIN BENGAL
    THE NEED FOR SPEED
    WALMART PRO STAFF SHOOTER

  3. #3
    Senior Member
    Join Date
    Nov 2011
    Location
    Camas Washington
    Posts
    145
    Post Thanks / Like

    Default

    get the best results with a nap 360. don't have the funds or time to buy a fall away other then the muzzt excellerator I have.. it could get it either.

  4. #4
    Senior Member TEN RING's Avatar
    Join Date
    Dec 2011
    Location
    western PA
    Posts
    858
    Post Thanks / Like

    Default

    you are more than likely getting some fletching interferance put lip stick or something on your fingersof your rest see if on you vanes
    MARTIN BENGAL
    THE NEED FOR SPEED
    WALMART PRO STAFF SHOOTER

  5. #5
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,622
    Post Thanks / Like

    Default

    I hate to say it but all three of my Ryteras tune with the rest slightly inside center. You do realize, I hope, that the difference between 15/16" and 7/8" is only 1/16", right? I haven't quite figured it out myself, but I have an inkling that the Hybrix cams are not as aggressive as we are led to believe so maybe a softer spine would work better. Don't be afraid to try a 400 spine.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  6. #6
    Senior Member
    Join Date
    Nov 2011
    Location
    Camas Washington
    Posts
    145
    Post Thanks / Like

    Default

    well I re measured the center shot its a smidge under 15/16.. I did try a 400 spine (55/75) and it was ugly...Bought 6 goldtip Kinetic 300 and the broadheads are flying nice and str8. No more wag to them....I feel really good about it as well... I was very stressed over it as well. deer season starting the 1st and elk the 4th... no time for this b.s

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •