Well having some issues....tuning

[jnordwell]

So I have a Alien Z RH 60 lber. I have been struggling to get it paper tuned and to get it broadheaded tuned for hunting season. I was using 350 trophy ridge crushes arrows cut a 29 in. They were tearing tail left everytime and could only get a slight tear the other way if I adjusted the rest all the way towards the riser. to looking down from the top of the bow the arrow is going towards the riser. so I adjusted the wt down to 50 lbs and got great flight not perfect but great. wanted to get it closer to 60 lbs so I bought some 300 spine arrows. now it shoots broadheads good at 60 lbs but the arrow is still going towards the riser. Some on here have said the center shot needs to be 15/16 but mine is more like 7/8 or just under it. Anythoughts on why?? I have 8 days until elk season so will be looking for ideas after sept?? Maybe swap limbs??

[TEN RING]

what arrow rest are you useing

[jnordwell]

get the best results with a nap 360. don't have the funds or time to buy a fall away other then the muzzt excellerator I have.. it could get it either.

[TEN RING]

you are more than likely getting some fletching interferance put lip stick or something on your fingersof your rest see if on you vanes

[bfisher]

I hate to say it but all three of my Ryteras tune with the rest slightly inside center. You do realize, I hope, that the difference between 15/16" and 7/8" is only 1/16", right? I haven't quite figured it out myself, but I have an inkling that the Hybrix cams are not as aggressive as we are led to believe so maybe a softer spine would work better. Don't be afraid to try a 400 spine.

[jnordwell]

well I re measured the center shot its a smidge under 15/16.. I did try a 400 spine (55/75) and it was ugly...Bought 6 goldtip Kinetic 300 and the broadheads are flying nice and str8. No more wag to them....I feel really good about it as well... I was very stressed over it as well. deer season starting the 1st and elk the 4th... no time for this b.s

[Double S]

I am using 400's on my Nemesis. I added a little length to 29 inches measuring from carbon to inside of nock. 60 pound DW exactly with 100 grain Broadheads. It's shooting good.

[elkslayer4x5]

I don't think that a Deer or an Elk will really care which side of the entrance hole the tail end of the shaft was on, Josh.

[jnordwell]

I don't think that a Deer or an Elk will really care which side of the entrance hole the tail end of the shaft was on, Josh.

LOL I just dont want to slap them with the side of the arrow...:P I bought some goldtip kinetic 300 and some 100 gr slicktricks.. Its all good now. Im right there at 15/16 off the shelf and have awesome flight all the wat out to 60 yards and got my bow back up to 61 lbs...Its all good in my neck of the woods now need to a double for the week I have off next week. Elk on say next wednesday and while I am up at my moms for butchering could get me a deer too....That would be a good day tater..

[Double S]

I pray that you have a safe and successful hunt. I will be out in GMU 133 stalking Muleys.