Will I need to move the draw stop?

[JayC]

I ordered these modules off eBay today for my '08 Bengal.

http://www.ebay.com/itm/290753294538...84.m1439.l2649

When they arrive, I am planning on trying the F4 module first. Right now the bow has the F7 module in it. Will I need to adjust the draw stop for a different module?

[droppixel]

Yeah, the module will shorten the DL, which will change the cam rotation. You'll definitely want to move it because the cam will come around, the cable will settle into the module before the draw stop gets there.

[JayC]

Thanks for the reply. This is where the stop is located now.



What would be the best way to adjust it? Loosen it, draw the bow back, and slide it up to meet the limb?

[droppixel]

Thanks for the reply. This is where the stop is located now.



What would be the best way to adjust it? Loosen it, draw the bow back, and slide it up to meet the limb?

Suggest loosen it up. Draw the bow back and have someone move it for you, let down and tighten. Or if you have a draw board, do it that way.

[gravedigger]

Thanks for the reply. This is where the stop is located now.



What would be the best way to adjust it? Loosen it, draw the bow back, and slide it up to meet the limb?

this is best done with 2 people.
put the mod in then lossen the draw stop.draw your bow back and find that sweet spot that fits you best.have the second person move your draw stop to the limb and have them snug it really fast then let your bow down,you will be able to tightn it good at that point.its nice to have a arrow knocked and aimed at a target incase of a premature release(i know but keep your minds out of the gutter )

no need to make the draw super loose,just enough that a second person can move it and then give the stop a quick turn