exile limb swap

[beadrunner]

Will 2010 exile and shadowcat limbs interchange. I'm looking at a shadowcat for my daughter and I need lighter limbs, or how much would they cost

[bfisher]

They should be interchangable. You need to post more detail and be specific, thus we can make particular recommendations.

[beadrunner]

Could I get a 45-60 shadowcat down to 42 lbs

[elkslayer4x5]

You can turn the shadowcat down to 42#s, but it may feel a bit 'spongy', and may not perform as efficiently as it did at peak draw weight. The last price I heard for new limbs was about $200.00. A better deal is possible if you call Dave Barmsdale , I think that you can get a set of limbs for about $150.

http://www.barnsdalearchery.com/

For used limbs check on Archerytalk classified ads--Accessories and General Hunting Items--Strings, cams, modules and limbs then searchforum-- Enter Martin and you'll get this page. There a guy who has several set of Martin limbs, but its an older post, might still some of them...Good luck.

http://www.archerytalk.com/vb/search...rchid=16813041

[beadrunner]

Scratch the shadowcat........ I just bought an Alien Nemesis 45-60 now I've got to get some 35-50 limbs.
I lost some ATA and brace height but I was worried about the weight and I got a good deal

[elkslayer4x5]

CAll Dave........


http://www.barnsdalearchery.com/

[Spiker]

Scratch the shadowcat........ I just bought an Alien Nemesis 45-60 now I've got to get some 35-50 limbs.
I lost some ATA and brace height but I was worried about the weight and I got a good deal

If your Nemesis has the 2.0 cams you will need 155 limbs to give you 35-50#.
If it has the 1.5 cams then you need the 175 limbs for 35-50#.
If your interested in a trade - I have a set of the 155's Carbon Fiber Rytera (Barnsdales) that I would swap (if yours are the carbon 135's).