Coastie what did you think of the Nemesis? Not sure why but getting a feeling for giving the longer ATA a whirl. The old Cheetah I had been shooting before my wife got me my '07 was longer, don't know what model year it was so can't look up all the specs on it to remember how long.
2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
REAL AVID Field Staff / Bucks and Beards Scents Field Staff
I just bought this bow. It came to my door tested at 73# from the factory! That was too much for me so I backed it down to 63# which is really nice. I have to say that the amount of adjustability with the Fury XT cam is awesome and it is also really nice that you can do it without a bowpress despite what the manual says. The cam seems pretty aggressive/jumpy to me, but I think I need to adjust the draw stop a bit. I haven't shot it yet as I still need to get some accessories and some arrows, but overall I am happy with my purchase.
One thing to be aware of is that the bow I got appears to be a 1 piece forged riser instead of a 3 piece, machined from billet riser. I am actually more satisfied with that, so no big deal to me.
http://www.martinarchery.com/2013/prowler.php or http://www.martinarchery.com/2013/specs.php). Typically the actual draw is half an inch longer than nominal, so you would probably get a minimum draw length of 25" with this bow. And that would be at the peak weight of the max. pounds - 20# (if you buy a 60# model, you would get max. pounds of 40# and minimum of 25#). Draw length adjustment is dependent on the pound peg adjustment in Fury XT cam - there are three pegs (or weight adjustment posts) where the end of the cable can be attached to. One is the max. pounds, second is max-10# and the third is max-20#.
Last edited by Phantonza; 11-26-2012 at 06:13 AM.
Rytera Nemesis, 2012
Martin Onza 3, 2011
Hoyt CRX 32, 2011 (SOLD)
Martin Phantom II, 2003