Results 1 to 2 of 2

Thread: Limb fork question

  1. #1
    Senior Member Don B's Avatar
    Join Date
    Aug 2011
    Location
    Riverside, Ca.
    Posts
    665
    Post Thanks / Like

    Default Limb fork question

    I had to replace the limbs on my Shadowcat awhile back because they split. I just noticed that one of my new limbs is now tweeked at the fork. I noticed that with the new limbs I was getting a real bad flyer once in a while when I was shooting, I thought it was just me, but I ended up finding that my top cam was leaning real bad. I pulled the bow apart and layed the limb on a flat suface and measured the height of the fork tips. One was almost a 1/16 taller than the other, causing the cam to lean real bad. I have looked and looked at the limb and can not find any cracks or splits. Anyone else run into this ?
    Don.
    I am sponsered by Louie Rangle-- Gator Feathers by Gator vanes...www.gatorvanes.com Deer Crossing Target shafts. Specialty Archery Timberdoodle ll rest. Bow String Depot Cables and String.
    I Shoot a 2012-SepterV and a 2011-Shadowcat
    I shoot Bowhunter, not barebow--fingers non-sights.
    Enter-ZESTY at checkout at Deer Crossing Archery- http://deercrossingarchery.com/
    For a 10% discount on all products, other than ECO Hunter shafts.

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,623
    Post Thanks / Like

    Default

    Sounds like you might have a twisted limb. What I'd do is swap them top to bottom and vise versa and see what happens. If the results aren't satisfactory then a call to Joel might be in order. I've found that any of the binary cammed bows exhibit a touch of cam lean (limb twist), but not much. Laying an arrow along the cam extended down the string I get about 1/4" of lean at the nocking point.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •