Nitro 2.0 Cams How much do they Cost?

[peace]

Anyone have any idea how much Nitro 2.0 Cams would cost? I am thinking about refitting a 2011 ShadowCat.

SMARTEN UP AND MARTIN UP

[droppixel]

From another thread about cam swaps ...

A complete cam set and strings retails at $403...you would likely pay much less at most shops but it would still be significant.

[peace]

From another thread about cam swaps ...

Thanks droppixel, I had to let the deal for the ShadowCat go. I will just wait two more years and get a 2013 Scepter V as a backup as I need it to be a 50#. I waited two years for The Seekers, another 730 days won't kill me, I hope.

SMARTEN UP AND MARTIN UP

[Sonny Thomas]

What were wanting to do, Peace? And how much do want to spend on a complete 2011 Shadowcat? Might throw in a good set of used Vapor Trail strings and a new set of pre-HammerHead Martin strings, sort of yellow and black.

[peace]

Sonny I saw a Shadow Cat for sale and got antsy as I am in the middle or tail end of the wait for my Scepter V. Just good old impatience getting the best of me, I need another bow like America needs Obama.

[Sonny Thomas]

Okay. Why would you need 2.0 Cams? I mean the 1.5s must exceed 30 inches of draw by a inch or so.

[peace]

Okay. Why would you need 2.0 Cams? I mean the 1.5s must exceed 30 inches of draw by a inch or so.

I wasn't aware of that, the specs on the 2011 ShadowCat said something like 27"-30" I never take advantage of the common knowledge that says all Martins run an inch and a half long. It would be just my fortune to end up with the one bow that didn't.

SMARTEN UP AND MARTIN UP

[Sonny Thomas]

I wasn't aware of that, the specs on the 2011 ShadowCat said something like 27"-30" I never take advantage of the common knowledge that says all Martins run an inch and a half long. It would be just my fortune to end up with the one bow that didn't.

If you ever find a 2010 or 2011 Shadowcat that is true to draw length by the mods, some one shorten the tape measure I know when I had one of my Cats set to 29" I was anchoring out past my ear.

Some one in here, Don? I thought when out to the 30 inch setting something was rubbing on something.

[macflash]

[QUOTE=peace;102713]I wasn't aware of that, the specs on the 2011 ShadowCat said something like 27"-30" I never take advantage of the common knowledge that says all Martins run an inch and a half long. It would be just my fortune to end up with the one bow that didn't.


OOOOoooo
uh not common knowledge for all, but explains everything, and really glad I went for the 4x, not 5x modules, on the Z's. still needed a few twists in the new Hutch string to bring it in and now that it's shot needs a couple more.

[Don B]

If your draw is under 31" the 1.5 cams will be fine.
My brother-in-law shoots a 31" draw and just for sits and giggles we set up one of my cats for him to try, not a problem.
I have all 3 of mine set at about 27.5" and the mods in the number 3 hole.
BTW, I paid $204.00 for a new set of 1.5 cams and mods through my local dealer.
Don.