On most of the Martin/Rytera bows that I've worked on it was possible to turn the limb bolts out about 10 turns before I saw daylight through the barrel nuts. At that point you can get about 2 more turns. for total of 12. Just watch the end of the bolt through the barrel nut. When working on the module, if one of the screws is hidden behind the limb you can just squeeze the cable to that cam toward the riser and this should rotate the cam enough to get at that screw. Keep us posted.
Last edited by bfisher; 12-30-2012 at 12:58 PM.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
PSAA Life member, UBP Life member
PADI AOW Diver