Results 1 to 2 of 2

Thread: martin phantom

  1. #1
    Join Date
    Feb 2008
    SW Minn
    Post Thanks / Like

    Default martin phantom

    I have a martin phantom with a dyna cam on it. On the side of the limbs it says 3m. Not sure what the draw weight of this bow is, my wife would like to start shooting and would like to use this bow if possible but would have to go down to 30=40 lbs. what limbs should I try to get for this bow, and are they still available?

  2. #2
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Lane County, Oregon
    Post Thanks / Like


    Probably going to have to run a "wanted to buy" add over on ArcheryTalk to find limbs for that bow. I'd look for 1L's or 1M's, 0L or 0M's if you can find them. With Martin limbs, the # is a 5lbs change. Your limbs are 3Ms, 2Ms would be 5 lbs lighter and 4ms would be 5 lbs heaver, the letters ( L, M, and H ) are 2 lbs different; if your 3ms are 60 lbs, a set of 3Ls would be 58lbs , 3H would be 62lbs. Hope that helps......
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts