Results 1 to 3 of 3

Thread: Martin Lynx M-7

  1. #1
    Junior Member
    Join Date
    Dec 2012
    San Diego area
    Post Thanks / Like

    Default Martin Lynx M-7

    I have an older Lynx Bow .. It has been in a case stored in my attic for a few years.

    I just got it back out and want to start shooting again and i have a couple of questions.

    1st it is a left handed bow

    1. Overdraw/arrow rest - I would like to change to an over draw I have long arms and the arrows are a bit long.
    2. If I do change to an overdraw/arrow rest, do I need to change my Knock Point on the string?
    3. Should I replace the bow string?
    4. The Martin/arrow rest now has come off ... if i keep the same set up, what type of epoxy was used to affix it to the bow?
    Attached Images Attached Images
    Last edited by Zino; 12-30-2012 at 12:56 PM.

  2. #2
    Senior Member typically8's Avatar
    Join Date
    Apr 2012
    Central Texas
    Post Thanks / Like


    The rest is not part of the Martin wood panel and should peel off. Not sure what kind of glue to use.
    2013 PANTERA w/ cloaked cams, PINK Meta peep, PINK/BROWN BSD strings, PINK/BROWN BowJax, Truglo Range Rover Pendulum Site, Shockwave Stabilizer
    2012 Onza III w/cloaked cams, Meta peep, Truglo Micro Brite, Shockwave Stabilizer
    2010 G5 Quest Primal
    True-Fire Hardcore and Winn Free Flight releases
    Maxima's tipped w/ RAGE broadheads (some w/ PINK fletching)

  3. #3
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Middletown, Pa, USA
    Post Thanks / Like


    Now that there is what I would call an antique. Old, but still serviceable. Possibly made in the mid 80's. First thing I would do is replace the string, but be sure you use a string made of either Dacron or B50 material. With steel cables you can't use modern fast flight materials.

    Secondly, I would advise not using an over draw. Over draws were commonly used on older bows and for a reason---more speed. However, this was back before the advent of carbon arrows so shooting an aluminum arrow of shorter, lighter spine also made the arrow faster. This si not necessary with most carbon arrows these days. Depending on what carbon arrows you'd choose they can be properly spined and light weight or heavy weight and anything in between. Also, even with carbon arrows you should keep the weight of the arrow fairly heavy, about 9 gr/lb of draw weight, to ensure you don't damage the cables or the limbs.
    Your arrows, especially for hunting, should extend beyond the riser because the riser on your bow is not machined to allow broadhead tipped arrows to be drawn past the front end of the riser.

    That wooden emblen can be glued back on this any epoxy your heart desires as it is not supposed to support the rest. For a rest I would recommend something like an old tried and true prong rest or even something like a Whisker bisquit if shooting with a release. If shooting fingers then something like a Star Hunter by Cartel or an AAE Free Flight or similar type of rest will suffice.

    Now, to do all this stuff and get the right rest, string, etc. I would find a decent archery shop in your locale and have them do the work. They should be able to help you pick arrows if you want new ones. Just note that with a bow this old your choices will be somewhat limited as it is not a modern high performance bow. A good shop should tell you all this, too.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts