Results 1 to 10 of 22

Thread: Alien Z: Broken Hybrix Cams

Hybrid View

  1. #1
    Senior Member Lab Rat's Avatar
    Join Date
    Sep 2012
    Location
    Southwest Michigan
    Posts
    131
    Post Thanks / Like

    Default Alien Z: Broken Hybrix Cams

    I was just shooting the Z when the bottom pin that holds the bowstring on the bottom cam tore off of the cam. I was at full draw and the pin became a projectile. Sounded like a 22 going off -- I immediately checked myself for a cut. The pin on the top cam is also twisted pretty bad. I sure wish that I would have been inspecting these cams however I am not sure that it would have resulted in a different result -- both cams need to be replaced. Has this been a common issue with the Hybrix cams?
    Attached Images Attached Images

  2. #2
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,792
    Post Thanks / Like

    Default

    First one I've heard of! Real glad that you were'nt injured. You will want to call customer service, and I'm sure that Joel will take care of you, and have you back up and shooting soon.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  3. #3
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,588
    Post Thanks / Like

    Default

    You ask if this is a common occurance? Honestly, it's the first one I've seen to this. As ES4x5 says, a call to Joel will most likely result in replacement cams although he may ask you to work through a dealer if there is one close by. I wwould advise that you send pics of both cams to him---Joel@martinarchery.com or at least have them ready to send when you talk to him.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  4. #4
    Member
    Join Date
    Oct 2011
    Posts
    55
    Post Thanks / Like

    Default

    first i saw . call tomorrow at 1-509-529-2554

  5. #5
    Senior Member daiwateampenn's Avatar
    Join Date
    Apr 2012
    Location
    Miri, Borneo
    Posts
    347
    Post Thanks / Like

    Default Crack Module

    Well, i guess im not in luck too..

    i dont have a bad cam (touch wood) but i had a bad module.

    the mod actually crack... wow..... notice it when i saw some fray on my cable, and check on the cam, and saw this on my mod.....
    Attached Images Attached Images
    2014 Alien Nitro , Sureloc Challenger + Viper Scope, Trophy Ridge Revolution, Easton Carbon One 500, Doinker Elite Supreme, Carter 2 Special.

  6. #6
    Senior Member Simple Life's Avatar
    Join Date
    Jul 2010
    Location
    Up here
    Posts
    999
    Post Thanks / Like

    Default

    Second time I heard of it.Happened on Tosi's Firecat http://martinarchery.com/mtechforum/...ghlight=broken.Glad to see you weren"t injured.
    Last edited by Simple Life; 01-06-2013 at 10:49 PM.
    2011 Firecat 400
    2013 PSE Drive
    2012 PSE Brute X

  7. #7
    Senior Member EnglishKev's Avatar
    Join Date
    Mar 2011
    Location
    Devon, England
    Posts
    107
    Post Thanks / Like

    Default

    Quote Originally Posted by daiwateampenn View Post
    Well, i guess im not in luck too..

    i dont have a bad cam (touch wood) but i had a bad module.

    the mod actually crack... wow..... notice it when i saw some fray on my cable, and check on the cam, and saw this on my mod.....
    I had similar to this on one of my AlienX bows, it had had a lot of shooting over a 2 1/2 year period though.
    Mine cracked in the bottom of the cable groove.
    Martin replaced them no problem, since them everything is good

    Kev
    2009 AlienX
    2009 AlienX (not a misprint, I have two)
    2010 AlienX
    I have other bows as well

  8. #8
    Senior Member Phantonza's Avatar
    Join Date
    Mar 2012
    Location
    Finland
    Posts
    174
    Post Thanks / Like

    Default

    Quote Originally Posted by daiwateampenn View Post
    Well, i guess im not in luck too..

    i dont have a bad cam (touch wood) but i had a bad module.

    the mod actually crack... wow..... notice it when i saw some fray on my cable, and check on the cam, and saw this on my mod.....
    Cool, custom green module But less cool it broke that way. Surprising, I wonder how that can happen, even though there are of course high forces present.

    Seems you haven't filed the 90 degree edges of the inner side of the module rounder. Haven't you experienced cable serving wear due to the sharp edge?

    Rytera Nemesis, 2012
    Martin Onza 3, 2011
    Hoyt CRX 32, 2011 (SOLD)
    Martin Phantom II, 2003

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •