Results 1 to 10 of 14

Thread: 2012 bengal pro question about ccs...

Hybrid View

  1. #1
    Junior Member
    Join Date
    Sep 2012
    Posts
    7
    Post Thanks / Like

    Default 2012 bengal pro question about ccs...

    i have purchased a 2009 martin ccs and want to install it on my bengal pro but realized the holes dont match up. is there any adapters or anything or a ccs that will fit a bengal pro. i hate the stock slide it just seem very loud to me. anyway i appreciate any answers.

  2. #2
    Senior Member Lab Rat's Avatar
    Join Date
    Sep 2012
    Location
    Southwest Michigan
    Posts
    131
    Post Thanks / Like

    Default

    I don't own a Bengal Pro, but there are a lot of owners here on this forum so they can help you. I will just throw in my opinion, changing the cable rod out to the CCS will not be straight forward. The pictures that I have seen of the Bengal Pro have the rod slide into the riser with a couple of bolts holding it in. The CCS is mounted flush into a slot that is machined into the riser. Also If you managed to install the CCS into the riser you would have to get new cables since it will preload the limbs a lot adding more weight. If you are trying to quite the Bengal down you are in the right place to ask questions. You may be able to add a better cable slide such as a Saunders or add a cable slide stop. I hope you enjoy your Bengal, those are awesome looking bows, and now that all of my bows are Nitro and Hybrix cams I have been thinking about acquiring a single cam. Droppixel will probably jump in here and steer you in the right direction -- if not you could send him a PM everyone here are very helpful. Good luck.

  3. #3
    Junior Member
    Join Date
    Sep 2012
    Posts
    7
    Post Thanks / Like

    Default

    yes i have noticed the slot that the cable rod slides into. i am a master precision machinist and have decided i am going to fabricate a solid aluminum block so it fits flush into the slot and will be secured by the two existing bolt holes and then i will drill two new holes into the new piece of aluminum for the ccs to be mounted. this is my idea. i think it will work fine and i dont have to drill holes into my riser so my warranty will not be voided. any more ideas guys?

  4. #4
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    6,078
    Post Thanks / Like

    Default

    Quote Originally Posted by brownitsdown View Post
    yes i have noticed the slot that the cable rod slides into. i am a master precision machinist and have decided i am going to fabricate a solid aluminum block so it fits flush into the slot and will be secured by the two existing bolt holes and then i will drill two new holes into the new piece of aluminum for the ccs to be mounted. this is my idea. i think it will work fine and i dont have to drill holes into my riser so my warranty will not be voided. any more ideas guys?
    That's the way to do it! DIY!!!!!





    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  5. #5
    Senior Member Lab Rat's Avatar
    Join Date
    Sep 2012
    Location
    Southwest Michigan
    Posts
    131
    Post Thanks / Like

    Default

    Maybe you could slide one of these into the riser and then you would be able to adjust the limb pre-load by the length of the shaft from the riser.
    Attached Images Attached Images

  6. #6
    Junior Member
    Join Date
    Sep 2012
    Posts
    7
    Post Thanks / Like

    Default

    i think this might even be a better idea! where can i get one?

  7. #7
    Senior Member Lab Rat's Avatar
    Join Date
    Sep 2012
    Location
    Southwest Michigan
    Posts
    131
    Post Thanks / Like

    Default

    That roller guide is installed on the Mathews bows. If you have a dealer around I am sure that you could get one from them. There are probably other manufactures that use a similar setup. I have thought about messing with one on my Onza, but my current setup works pretty well with the cable slide and cable slide stop.

  8. #8
    Senior Member droppixel's Avatar
    Join Date
    Apr 2011
    Location
    Plano, IL
    Posts
    1,607
    Post Thanks / Like

    Default

    Quote Originally Posted by brownitsdown View Post
    i have purchased a 2009 martin ccs and want to install it on my bengal pro but realized the holes dont match up. is there any adapters or anything or a ccs that will fit a bengal pro. i hate the stock slide it just seem very loud to me. anyway i appreciate any answers.
    Stock slide was the first thing that was changed from my Bengal before any other accessory was installed on the bow. I run a Saunders Hyper Glide and can't say anything bad about it and I'm sure the others that do will say the same. Might take a look at one of those prior to trying to figure out how to machine something for a CCS mount and need to take into consideration that with the CCS it is probably best that your cables be served where they pass through the rollers. Just one more thing to think about.

    I do like the idea to being able to change out the rod for others that have rollers like Matthews or the flex like G5, but don't think that is possible really unless they are willing to sell you that part direct - even then it would take some testing I'd think in order make sure they all function properly because they may have their's placed in different locations of the riser which might not match up with how the Martins are centered/etc.
    2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
    REAL AVID Field Staff / Bucks and Beards Scents Field Staff

  9. #9
    Junior Member
    Join Date
    Sep 2012
    Posts
    7
    Post Thanks / Like

    Default

    i have decided i am gonna go with the saunders. i like how it looks and the design. that being said the new ccs i have bought is for sale i paid 40 shipped and will sell it for 30 shipped.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •