String changing on martin saber

[Sabertooth]

Final measurment: Ima leave it befor i do any string twisting just in case stretching does happen ill get about 100 shots in
(All at max)
A2A: 32 1/16
BH: 7 3/8
Measured DW at max was 67.25

[Hutch~n~Son Archery]

Final measurment: Ima leave it befor i do any string twisting just in case stretching does happen ill get about 100 shots in
(All at max)
A2A: 32 1/16
BH: 7 3/8
Measured DW at max was 67.25

If the string is built well, you should be able to shoot 20 shots and install the peep and it should not move one bit. Then fine tune it and you are good to go!




Hutch

[Sabertooth]

pm you already is it a problem if my final dw is reading 67 1/4 at max i rought tied in my peep its tight but allows for adjustments

[Hutch~n~Son Archery]

Put 5 twists in the cable to bring up the pounds. Check it then do it again if necessary. Oh btw twist from the bottom of the cable.



Hutch

[Sabertooth]

ok added 5 twist to cable brought it up to 68.5, increase bh alil decreased a2a alil but it feel great on dl think ill just keep it this way shoot it and see wat happens

[Hutch~n~Son Archery]

If you add any more twists to the cable you will need to take 3 out of the string to the 5 you put in the cable.



Hutch

[wscywabbit]

If you add any more twists to the cable you will need to take 3 out of the string to the 5 you put in the cable.



Hutch

Does that math work on most bows? Or is it just single cams with a split cable? Just curious.

[Hutch~n~Son Archery]

No wabbit, he is so close to where he needs to be I suggested that ratio. Here is a link that will better help you to get your answer.

http://martinarchery.com/mtechforum/...ng+twist+ratio




Hutch

[Sabertooth]

when setting specs should the string be on longest peg before measuring?

[Hutch~n~Son Archery]

It should be to their specs and your draw length.





Hutch