Results 1 to 10 of 10

Thread: large cutting diameter (fixed blade) vs. vanes - g5 striker (magnum)

Hybrid View

  1. #1
    Member
    Join Date
    Dec 2012
    Location
    Austria - Vienna
    Posts
    56
    Post Thanks / Like

    Default large cutting diameter (fixed blade) vs. vanes - g5 striker (magnum)

    i guess the striker magnum will not fly like a field point, but does the larger cutting diameter implicate larger/ higher vanes as well??

    i thought of trying the striker with its 1,5'' cutting diameter, but im using mini blazers (1,5'' length; profile height of .49") and the head would be much higher than the vanes. could this negatively affect arrow flight?

  2. #2
    Senior Member Ehunter's Avatar
    Join Date
    Mar 2010
    Location
    Southeast Kansas
    Posts
    1,747
    Post Thanks / Like

    Default

    Usually, yes. Larger heads usually like larger fletchings. One of the deciding factors is how well your bow is tuned. I've shot 1 1/4" broadheads with small Duravane 3D vanes before, and had good success. Other times, I've had to go with Blazers to get 1 1/8th" broadheads to fly well. That's my standard setup. 1 1/8th cut broadhead, 2" Blazers or Predator vanes. That always seems to work very well for me. You may not have to go with higher vanes, but rather longer vanes. That'll give you more surface area on your vanes, and that really helps.
    2006 Rytera Bullet X 60#---2008 Moab 70#
    2008/12 Firecat 60#--- 2010 Warthog 70#
    2009 Warthog 70#---2009-10-12? Warthog Frankenbow with Nitrous B
    2010 Strother SR-71 65# & 2012 Strother Rush 65#
    2012 Strother SX Rush 60# & 2011 Strother Infinity 70#
    BSD strings and cables

    Yeah, I know I'm grumpy and opinionated.

  3. #3
    Senior Member
    Join Date
    Aug 2011
    Posts
    415
    Post Thanks / Like

    Default

    I am going to put some 125grn Phantoms on a Easton Axis 340 with 4" Truflight shieldcut feathers. Hopeing for a Tule Elk doe tag. I expect some good results.

  4. #4
    Member
    Join Date
    Dec 2012
    Location
    Austria - Vienna
    Posts
    56
    Post Thanks / Like

    Default

    the phantom has only 1 1/8 cutting diameter, so i guess this should work very well!!

    i must say, im very fascinated by the striker magnum, its a close range head though..

    maybe i will try 4'' shield vanes with silver flames, they are sharp!!! -> http://www.youtube.com/watch?v=66PBfqYy_IY

  5. #5
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,957
    Post Thanks / Like

    Default

    Quote Originally Posted by bob cooly View Post
    I am going to put some 125grn Phantoms on a Easton Axis 340 with 4" Truflight shieldcut feathers. Hopeing for a Tule Elk doe tag. I expect some good results.
    Good luck on that draw, hope you get your tag. Where in California are you located? Before moving up here to Oregon, I lived in Mendocino county, which is blessed with two elk species, Tule and Roosevelt, the year I moved up here, Calif. opened Mendocino county for elk hunts, 4 Tule and 4 Roosevelts, another great spot would be the Lake Pillsbury hunt for Tule. That is probably the easiest hunt, low entry numbers, and lots of Elk. Again, Good luck Bob! Oh yeah, the lady elk are called cows!
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  6. #6
    Senior Member
    Join Date
    Aug 2011
    Posts
    415
    Post Thanks / Like

    Default

    Eslayer; cows yea I got it. Somewhere in the Owens Valley between Lone Pine and Bishop. My buddy took a herd bull a few years back with a muzzleloader. There's a 90% sucess rate for gun hunters there. Tags are limited, but if you talk to the ranchers they hate the Elk as they are very hard on fences. I only pull 60 lbs max so I wanted something that would penetrate. You know these are not huge animals but Craigs bull took 4 hits from a 50 cal. all in the boiler room before it tipped over. Certain animals just refuse to admit their dead.

  7. #7
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,957
    Post Thanks / Like

    Default

    Quote Originally Posted by bob cooly View Post
    Eslayer; cows yea I got it. Somewhere in the Owens Valley between Lone Pine and Bishop. My buddy took a herd bull a few years back with a muzzleloader. There's a 90% sucess rate for gun hunters there. Tags are limited, but if you talk to the ranchers they hate the Elk as they are very hard on fences. I only pull 60 lbs max so I wanted something that would penetrate. You know these are not huge animals but Craigs bull took 4 hits from a 50 cal. all in the boiler room before it tipped over. Certain animals just refuse to admit their dead.
    Sure sounds like an elk! But your 60 #er will do the job for you! Good luck! My uncle Harold was the head ranger at Bishop thru the 60's and 70's. Yep, elk are tough on fences, no need to jump over it if you can push through it!
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •