Results 1 to 9 of 9

Thread: Bow tuning tip

  1. #1
    Join Date
    Oct 2012
    Posts
    443

    Default Bow tuning tip

    Best tip I know of; Don't drive yourself nuts!
    Yeah! There are so many different tuning procedures and everybody and their brother having a article or their way doing it.

    Basic tuning - probably the best for alround for getting the bow shooting reasonably darn good. Most would be good right here and forget the rest.

    Walk Back tuning; Fairly nice, short distance and gets the job done darned well. I use it for most all my customer and myself. 10 ft and 30 yards is what I use. ??? I think it was my 2010 Shadowcat I did this with and I won a novelty shoot, 2" clay disc at 53 yards. Drilled that sucker twice.

    Modified French Tuning; Probably works, but I got started with the full French tuning procedure and never checked out the Modififed version.

    French Tuning Procedure; Notably the finest tuning procedure for setting center shot. 9 feet to out where you can still hit with the same pin. I can usually keep on a target butt out to 55 and 60 yards. The longer the distance the more perfect center shot is. Shot Outdoor and Field for 3 years and placed and won my fair share of times. Have link if anyone is interested.

    Yoke tuning; I tune a yoke for cam lean, not fine tuning something I don't need fine tuned. See next.

    Kitchen Sink tuning; Glanced over this the other night. Lord have mercy. To me this is yoke tuning, but for other reasons. Why would you tinker with the yoke when you tinkered with it to eliminate cam lean? Ain't saying it doesn't work, just why drive yourself nuts?

    Bare shaft tuning; I'd rather take my wife shopping. This works, but having spoke with technicians that do this for a living, I'd not need it. First, bare shaft tuning is better done with the arrow weighted in the area of where the vanes will be with the same weight of the vanes (Scotch or electrical tape). Techs told me they have shot accurately out to 60 yards (2" groups).

    Paper tuning; Works, but figure it one step towards fine tuning your bow. I will not paper tune for someone. I will help them with adjustments, but that's it. Okay, my natural shooting is not the same as others. I paper tune and get great results and the owner takes the bow home, shoots through paper and rips it to shreds. So; "That bow mechanic down there doesn't know what he's doing!"

    Super tuning; Normally this is someone getting best performance from a bow. People send bows out for this. Duh? See Paper tuning. Yep, I can crank a few more rpms out of a bow, but how much do you want to pay for it? And if something goes wrong, dropped, new rest, different arrow, different draw lenght, you want to pay for another Super Tune?

  2. #2
    Join Date
    Nov 2008
    Location
    Sultan, WA
    Posts
    1,090

    Default

    Nicely put Sonny, I couldn't agree more. I also can't think of anything else to add, so I'll just say thank you and leave it at that! lol
    My wife packed my bags and threw me out, as I was walking out the door, she told me "I hope you have a long and miserable life!"... To which I replied "Oh, now you want me to stay?!" LOL

    2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
    2005 Saber: 70#, same arrow, 250 fps

  3. #3
    Join Date
    Mar 2012
    Location
    livingston county michigan
    Posts
    454

    Default

    Great read! Thanks.
    Martin x-200 unsure of year
    2009 Martin cheetah
    2012 Martin Saber Take-down
    2012 Martin Bengal pro
    2013 Martin Nemesis 35

  4. #4
    Join Date
    Dec 2012
    Location
    Austria - Vienna
    Posts
    55

    Default

    Best tip I know of; Don't drive yourself nuts!
    easier said than done..

  5. #5
    Join Date
    Oct 2012
    Posts
    443

    Default Bow tuning tip

    Now, going hand in hand with my Bow tuning tip you have to build your arrows correctly.

    Yeah, I got bored at the shop today... First pic is from 20 yards. Second pic is from 30 yards - should be four holes.

    If you missed something you oughts to look again
    Attached Images Attached Images  

  6. #6
    Join Date
    Aug 2011
    Posts
    340

    Default

    Tell me about the fletching, looks backwards to me.

  7. #7
    Join Date
    Oct 2012
    Posts
    443

    Default Bow tuning tip

    Yep, backwards and full helical for the 1 3/4" Bohning X vane Shield cuts. I used the two methods for FOC, cut shaft length and full length. Respectively, 8.29% and 7.19%.
    I shot I don't know how many times after the first pics and the arrow kept repeating.

  8. #8
    Join Date
    Aug 2011
    Posts
    340

    Default

    Sonny, I've thought of that with some Blazers. Actually I double fletched some Blazers I was thinking might shoot a Magnus Bullhead and the arrow shot great, just never put a Bullhead on it' looks too much like a runaway Helicopter Blade to me.

  9. #9
    Join Date
    Oct 2012
    Posts
    443

    Default Bow tuning tip

    And don't tread on someone's favorite tuning procedure or "Hero" tuner. Yeah, someone posted of this one tuning procedure resulting in Robin Hoods and super tight groups. The particular tuning procedure is one I don't advocate one bit, but it probably works. Only it works differently than people think. You have to understand how it effects the bow/center shot.

    Anyway, my reply was only to say what works for you, works for you. I noted none of my bows have been tuned with his favorite procedure. I then gave a example - see pic. That particular bow that shot those groups is one I noted in another post or reply - totally a wreck considering the wheel and cam lean. The individual wasn't quite happy, but more understanding after a bit.....

    I think I've posted enough pics of groups my bows have shot in here and giving prove what works for me, works for me.

    Of the pic. 1st shows close and a bent over vane. 2nd, the dot is 1" in diameter. I think there is five there. 2" group would you say? 3rd, 2 touching and one nearest the broken arrow I was aiming at, maybe a finger width separating the group. What, another 2" group? Guess how the broken arrow got broke.
    Attached Images Attached Images  
    Last edited by Sonny Thomas; 06-09-2013 at 02:00 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •