Results 1 to 10 of 10

Thread: Diy Bow vise!!

Hybrid View

  1. #1
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,789
    Post Thanks / Like

    Default Diy Bow vise!!

    Build away its cheap and holds the bow well enough that I can center serve it.
    I used 2 short pieces of angle iron. These go on the c clamp.
    2 short pieces of angle iron
    2 pieces of 3/4" square tube
    2 bolts and nuts approx 3/8" x 6" (not sure)
    5/8" x 12" steel rod
    3" C clamp
    Stick on felt pad








    I am going to get new felt pad and glue it one and its done.



    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  2. #2
    Senior Member Mike G's Avatar
    Join Date
    Dec 2012
    Location
    Briarton, Wi
    Posts
    191
    Post Thanks / Like

    Default

    Nice!!

    I was just telling my buddy that I could weld him up a bow vise cheap. This will make it easier for me, instead of trying to figure out how to go about it.

    Thanks.
    Mike

  3. #3
    Senior Member Mike G's Avatar
    Join Date
    Dec 2012
    Location
    Briarton, Wi
    Posts
    191
    Post Thanks / Like

    Default

    I just realized; looking at your bow; that you are also a lefty. I didn't know that or never paid attention to it before now!

  4. #4
    Senior Member droppixel's Avatar
    Join Date
    Apr 2011
    Location
    Plano, IL
    Posts
    1,634
    Post Thanks / Like

    Default

    Quote Originally Posted by Mike G View Post
    I just realized; looking at your bow; that you are also a lefty. I didn't know that or never paid attention to it before now!
    It's called "wronghandedness" it's a horrible disease that a certain portion of the population has ... something that will never go away!
    2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
    REAL AVID Field Staff / Bucks and Beards Scents Field Staff

  5. #5
    Sonny Thomas
    Guest

    Default Diy Bow vise!!

    They showed with your second posting of them. Huge, but showing. What'd ya do different? I seen those boxed red Xs in other replies and me Email and couldn't get them to show.

  6. #6
    Senior Member wscywabbit's Avatar
    Join Date
    Nov 2008
    Location
    Sultan, WA
    Posts
    1,575
    Post Thanks / Like

    Default

    Nice vise, I may have to make one! Thanks for sharing
    In God and guns we trust;
    • One nation, under God, indivisible, with liberty and justice for all.
    • A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.


    2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
    2005 Saber: 70#, same arrow, 250 fps

  7. #7
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,836
    Post Thanks / Like

    Default

    Quote Originally Posted by Hutch~n~Son Archery View Post
    Build away its cheap and holds the bow well enough that I can center serve it.
    I used 2 short pieces of angle iron. These go on the c clamp.
    2 short pieces of angle iron
    2 pieces of 3/4" square tube
    2 bolts and nuts approx 3/8" x 6" (not sure)
    5/8" x 12" steel rod
    3" C clamp
    Stick on felt pad









    I am going to get new felt pad and glue it one and its done.



    Hutch
    Nice photos, if you like small boxes with red X's in 'em.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  8. #8
    Sonny Thomas
    Guest

    Default Diy Bow vise!!

    Same here. Red Xs in tiny boxes.

  9. #9
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,789
    Post Thanks / Like

    Default

    Quote Originally Posted by Sonny Thomas View Post
    Same here. Red Xs in tiny boxes.
    Don't know what to tell ya! I see them and Mike G sees them.




    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  10. #10
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,789
    Post Thanks / Like

    Default Lets do this one again!

    Build away its cheap and holds the bow well enough that I can center serve it.
    I used 2 short pieces of angle iron. These go on the c clamp.
    2 short pieces of angle iron
    2 pieces of 3/4" square tube
    2 bolts and nuts approx 3/8" x 6" (not sure)
    5/8" x 12" steel rod
    3" C clamp
    Stick on felt pad


    101_2324.jpg101_2326.jpg101_2332.jpg101_2330.jpg


    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •