Results 1 to 9 of 9

Thread: Tuning Alien X with CCS

Hybrid View

  1. #1
    Senior Member Lab Rat's Avatar
    Join Date
    Sep 2012
    Location
    Southwest Michigan
    Posts
    129
    Post Thanks / Like

    Default Tuning Alien X with CCS

    I know that a lot has been said about the CCS and the love-hate relationship that some of us have with them. I am waiting for a conversion kit from Martin to rid myself of the CCS. I would like to keep the CCS on the bow, but the only way that I am able to have enough adjustment in the site is to loosen the forward CCS bolt and allow the CCS to tilt in closer to the bowstring. I know that many have placed shims under the CCS in order to make this type of fix more permanent. What other options are there with the CCS? It is too bad that the CCS isn't more adjustable like adding additional roller pin locations closer to the riser to adjust for less clearance and less side torque. I don't need nearly that much clearance for vanes.

  2. #2
    Senior Member Ehunter's Avatar
    Join Date
    Mar 2010
    Location
    Southeast Kansas
    Posts
    1,702
    Post Thanks / Like

    Default

    I hear ya Lab. Both my Aliens have the CCS, and ALOT of vane clearance. Luckily, it doesn't cause any cam lean, and hasn't affected my tuning. Both were very easy to tune, and have stayed in tune. Would feel better about it if it did have some adjustment though. My old '09 Firecat I had was the same way. No lean, easy to tune, and lotsa clearance. I think 3/8-1/2 inch clearance is more than enough. Might be able to shoot Flu-flus without fletching contact. lol
    2006 Rytera Bullet X 60#---2008 Moab 70#
    2008/12 Firecat 60#--- 2010 Warthog 70#
    2009 Warthog 70#
    2010 Strother SR-71 65# & 2012 Strother Rush 65#
    2012 Strother SX Rush 60# & 2011 Strother Infinity 70#
    BSD strings and cables

    Yeah, I know I'm grumpy and opinionated.

  3. #3
    Senior Member bowgramp59's Avatar
    Join Date
    Sep 2008
    Location
    vernon texas
    Posts
    507
    Post Thanks / Like

    Default

    i have 3 alien xs i changed all mine to a cable slide system which i made myself , i was having to much cam lean on the bottom cam. it did not change a thing on the bows brace ht. ata, peak wt. stayed the same. the change made all three bows much smoother to draw. i hated to hear that they are putting the css on some of their 2013 bows, if it aint broke don't fix it. good luck
    curtis

    2010 nemesis camo, 2011 nemesis carbon fiber,
    2010 onza 3 camo,

  4. #4
    Senior Member Lab Rat's Avatar
    Join Date
    Sep 2012
    Location
    Southwest Michigan
    Posts
    129
    Post Thanks / Like

    Default

    I finally got all the hardware to change the CCS out. I bought a conversion kit from Martin and installed a tilt tamer select on it. Centershot set very close to the initial eyeballing of bowstring. So much easier without the CCS. I honestly was a little worried that the bow would be a little louder because my Alien Z setup the same way was a little louder without the CCS. This time though the bow is whisper quite with the cable slide and the tilt tamer. Can't wait for deer season this Alien X is a perfect deer stand bow. I like shooting it so much that I am considering getting rid of the Alien Z and maybe getting a Scepter V for target. I wonder if anyone would consider such a trade?

  5. #5
    Senior Member
    Join Date
    Jun 2011
    Posts
    199
    Post Thanks / Like

    Default

    Is the conversion kit just a bracket that the rod slides into? Also, how much did it cost?
    2012 Rytera Nemesis in vista camo
    equipment list
    • Strings by BOW STRING DEPOT (Formerly hutch n sons archery)
    • octane stabilizer
    • 3/16 meta peep
    • HHA ol5519 sight
    • QAD ultrarest HDX in realtree ap
    • fuse 3 arrow quiver
    • saunders hyperglide cable slide

  6. #6
    Senior Member Lab Rat's Avatar
    Join Date
    Sep 2012
    Location
    Southwest Michigan
    Posts
    129
    Post Thanks / Like

    Default

    It is a bracket and two screws. The bracket slides in and the two screws just pin the guide rod to the bracket. I think that it was $12.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •