2012 Nemises making loud ting noise after arrow is released

[Jamie73]

I have this problem with a loud noise! At end of release a loud ting! Modular or limb?
Everything is tight, tuned and running well except this loud ting! Driving me nuts!
I took it to league shot and all 10 guys noticed it! So it's not me and its loud! Loud enough to not take it into the woods were it was intended for next season!
And concerns it has a cracked limb or bad cam!
Any suggestions?

[gravedigger]

E-clips or the nylon thin spacers.i had to put new thin spacers in from so much shooting they wore down to nothing.and also the E-clips made so much noise.i just rubbed some wax on the clips and they got quiet.

and a big welcome to the martin tech forum

[bowgramp59]

what kind of arrow rest do you have on the bow?

[Jamie73]

Nap hd pro! I took everything off one by one to narrow it down! Were can I get the rings and e-ckips!
Thanks

[gravedigger]

any hard ware store should stock the E-clips and nylon washers.i had to replace the nylon washers and went ahead and replaced the E-clips as well.all bought from ACE.

[Jamie73]

Are you talking about the clips on cam axel's on the out side limbs! and washers on inside cams? What do they look like if you have any picks of them it would be awsome or explain we're there located so I can replace them?
Thanks again!

[gravedigger]

i will see if i can find some pics.

[gravedigger]

i will have to post pics monday if someone has not allready.my funeral is over and family is leaving so i have to go lower,take down my set up and back fill.sorry

[Jamie73]

No problem I truly appreciate it!

[ks_coh]

Have you checked to make sure your modules screws are tight? They can make the same ting sound if not tight.