Results 1 to 4 of 4

Thread: BroadheadTalk.com

  1. #1
    Super Moderator Arrow Splitter's Avatar
    Join Date
    Oct 2010
    Location
    Gilmanton, NH, United States
    Posts
    3,809
    Post Thanks / Like

    Default BroadheadTalk.com

    Here's a forum for you guys to check out:http://www.broadheadtalk.com/
    I've been a member there for a little while(under the same username), and it seems to be an excellent forum.
    2011 Martin Firecat 400/NAP Apache Dropaway/Truglo Xtreme Sight/Custom 8" Stabilizer/Victory V6 Arrows
    2007 Martin Jaguar /Trophy Taker Dropaway/Extreme Sight/Custom 21" Stabilizer/Victory V6 Arrows
    Bow String Depot, Custom String Builders email us @ bowstringdepot@gmail.com

  2. #2
    Senior Member alex's Avatar
    Join Date
    Nov 2008
    Location
    Bulgaria
    Posts
    1,366
    Post Thanks / Like

    Default

    Thanks for the link! I don't use broadheads, but it's good to know that there's such a forum just in case...
    2008 Martin MOAB - 45-60#, set at about 51-53# / 55#" Perfect Line" compound/ 55# Mongol horsebow/ 45# "Perfect Line" takedown recurve/ 45# Bearpaw Grizzly hunter recurve/ 55# Samick Longbow Cheetah ... and several homemade bows

  3. #3
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,923
    Post Thanks / Like

    Default

    Thanks, can always yap about broadheads, asked who recomemded me, so now you've got at least one reference. Thanks again, probably see ya there.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  4. #4
    Member
    Join Date
    Jan 2012
    Posts
    85
    Post Thanks / Like

    Default How far is too far for moving centershot and nocking point when broadhead tuning

    been messing with my Onza trying to get some 10 grain thunderheads to shoot the same as the field points...turns out 400 spined arrows at 28" put he broadhead to the right and if I moved the rest really far to the right(should be left), I got some good results...yet this can't possibly corrrect as its no way lined up with the string at this point.

    next i swithed to a 29" 350 spine and reset the centershot....arrows ends up in the center, but this time is high with the broadhead....dropping the rest down pretty far seemed to get good results but once again there's no way that could be correct as the nocking point was 3/8" above level and the vanes looked as they could hit the self....however, did notice my arrow wasnt level with the berger holes, so I reset the rest and will start over.

    question is.how far should you move the rest from centerline before you decide the arrow is not spined right?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •