Results 1 to 6 of 6

Thread: Timing Cams?

  1. #1
    Senior Member
    Join Date
    Nov 2010
    Location
    Indiana
    Posts
    355
    Post Thanks / Like

    Default Timing Cams?

    I have access to a draw machine but I'm not familiar with timing the Nitro cams on my Scepter V. I would appreciate it if someone could walk me through the process. Thanks.

  2. #2
    Senior Member droppixel's Avatar
    Join Date
    Apr 2011
    Location
    Plano, IL
    Posts
    1,603
    Post Thanks / Like

    Default

    Set a mark on the modules and draw the bow back to check that both cables enter the module or hit the mark at the same exact time.
    2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
    REAL AVID Field Staff / Bucks and Beards Scents Field Staff

  3. #3
    Senior Member wscywabbit's Avatar
    Join Date
    Nov 2008
    Location
    Sultan, WA
    Posts
    1,570
    Post Thanks / Like

    Default

    The Nitro cams are the same as the Hybix cams on the Ryteras, and are similar to the older CAT cams, and can all be timed the same way. Here is a video to help you out, NITRO SETUP. At 5 minutes in, it goes into setting the timing of the cams...
    In God and guns we trust;
    • One nation, under God, indivisible, with liberty and justice for all.
    • A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.


    2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
    2005 Saber: 70#, same arrow, 250 fps

  4. #4
    Sonny Thomas
    Guest

    Default Timing Cams?

    Carlos, beings that you are in Indiana geological location may effect timing of your Scepter V. Otherwise, time it just like your Shadowcat. You if don't have the manual you can down load it. There are pictures of the Nitro cams and instructions enough to set timing - twist that cable or untwist the other thing.

  5. #5
    Senior Member
    Join Date
    Nov 2010
    Location
    Indiana
    Posts
    355
    Post Thanks / Like

    Default

    thanks for the video wabbit.

  6. #6
    Senior Member wscywabbit's Avatar
    Join Date
    Nov 2008
    Location
    Sultan, WA
    Posts
    1,570
    Post Thanks / Like

    Default

    No worries, we're all here to help!
    In God and guns we trust;
    • One nation, under God, indivisible, with liberty and justice for all.
    • A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.


    2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
    2005 Saber: 70#, same arrow, 250 fps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •