Timing Cams?

[CarlosII]

I have access to a draw machine but I'm not familiar with timing the Nitro cams on my Scepter V. I would appreciate it if someone could walk me through the process. Thanks.

[droppixel]

Set a mark on the modules and draw the bow back to check that both cables enter the module or hit the mark at the same exact time.

[wscywabbit]

The Nitro cams are the same as the Hybix cams on the Ryteras, and are similar to the older CAT cams, and can all be timed the same way. Here is a video to help you out, NITRO SETUP. At 5 minutes in, it goes into setting the timing of the cams...

[Sonny Thomas]

Carlos, beings that you are in Indiana geological location may effect timing of your Scepter V. Otherwise, time it just like your Shadowcat. You if don't have the manual you can down load it. There are pictures of the Nitro cams and instructions enough to set timing - twist that cable or untwist the other thing.

[CarlosII]

thanks for the video wabbit.

[wscywabbit]

No worries, we're all here to help!