Mine is the older version, but I have dual cams, they are timed perfect, the only thing I get is a little lift from my rest, so I get a little tear on the top. Maybe try the baby powder on it and see if he's getting fletch contact, ... knock point not set exactly where it needs, wrong spine on the shaft? just a few obvious things I've learned from you guys.
A veteran is someone who, at one point in his life, wrote a blank check made payable to
The United States of America ' for an amount of 'up to and including my life.
'96 Firecat, '66 Herters
REAL AVID Field Staff
Finally, now says they have a 3/8" nock low setting to even get it close to paper tuning.
Ain't no way sync/timing is correct. Maybe a weak limb, but two bows and both having tuning issues says someone isn't doing something right. Maybe even having a mod not set right and someone twisting cables to make..... I've seen this before. Even heard of changing mod for draw length and not resetting the draw stop.
Trying to get him to send pics. Frustrating is turn around time.
Last edited by Sonny Thomas; 04-11-2013 at 09:00 AM.
Hi guys, I happen to be the owner of the firecat bows that are being discused here and I think that the original question here was misinterpreted. The issue is that with the bow at rest and the arrow square with the string and level with the cable guide during the draw cycle the arrow raises up about 3/4" putting the arrow at a very noticeable angle. If this explanation makes sense and anyone would like to comment on it please feel free.
Well first things first, welcome to the forum, glad you're here!
Secondly, I'm not sure if I follow what what you're saying... are you saying that at rest you ended up with a 3/4" high nock height?, or that the nock travel is 3/4" vertical during the cycle?
I think that the first would indicate an issue, most likely with clearance, and that the second would probably be close to normal, especially given that the nock point is not "center" of the shooting string anyways...
In God and guns we trust;
- One nation, under God, indivisible, with liberty and justice for all.
- A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
2005 Saber: 70#, same arrow, 250 fps
Might sound stupid but I've seen it before. Are you using a drop away rest, and making sure the rest is in the "UP" position at rest when you set the nock heigth? Had a guy set his nock height with the rest in the down position, then got the exact same thing when he drew back, and the rest came up... Other things to check, make sure the mods are in the same settings, both mods are on #3 for instance. Only other things that make sense are cams WAY out of time/synch, or a bad limb.
2006 Rytera Bullet X 60#---2008 Moab 70#
2008/12 Firecat 60#--- 2010 Warthog 70#
2009 Warthog 70#
2010 Strother SR-71 65# & 2012 Strother Rush 65#
2012 Strother SX Rush 60# & 2011 Strother Infinity 70#
Yeah, I know I'm grumpy and opinionated.