Results 1 to 5 of 5

Thread: Fletch Contact On 08 Bengal

  1. #1
    08BENGAL
    Guest

    Default Fletch Contact On 08 Bengal

    anyone else had trouble with the fletch contact with the cable. contacted martin & they sent me a new cable slide. it helped some. i didnt get clearance until i swiched to acc 3-28 arrows

  2. #2
    flytier17
    Guest

    Default

    Try rotating the slide, and the arrow.

  3. #3
    08BENGAL
    Guest

    Default

    the slide on the 08 model is straight not bent like the 07

  4. #4
    Member
    Join Date
    Jan 2008
    Location
    Toronto, Ontario
    Posts
    41
    Post Thanks / Like

    Default Fletch contact on 08 Bengal

    I own an 08 Bengal with the straight cable guard.When I set up my Whisker Biscuit rest, I referred to the instructions on page 5 of the Compound Tech Manual. I'm shooting 2" Blazer vanes with the cock vane up and have approximately 1/8" clearance between the right vane and the cables.By turning the nock a bit counter-clockwise you can gain more clearance.Check if you rest is centered.The manual can be down-loaded from the Martin website.

  5. #5
    08BENGAL
    Guest

    Default

    Once i went to acc arrows i now have clearance without having to tune my arrow. Aluminums had to be turned to get any clearance at all.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •