Results 1 to 8 of 8

Thread: WTB Nitrous X mods, axles and rollers.

  1. #1
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    82
    Post Thanks / Like

    Default WTB Nitrous X mods, axles and rollers.

    I'm in need of some X mods for a set of Nitrous cams I just purchased. I need the regular ones, not the Minis... Not too picky about let off. I also need axles that will work to round out my hot through system. They will be used with 1.5" Barnesdale limbs.

    PM me with what you have and we can go from there.

    Thanks!!

  2. #2
    Senior Member
    Join Date
    Feb 2012
    Location
    Nebraska
    Posts
    226
    Post Thanks / Like

    Default

    Interesting reading on your request. Did not know of any Martin bows that came with Barnsdales AND Nitrous cams. The only ones I know of were conversions and they had to sand the inside of the limbs (Yikes!!!) to get the cams to fit. The standard limbs with the nitrous cams all had square tips on the riser end, the Barnsdales had round tips on the riser ends and were narrower and did not fit the pockets very well without slopping around.
    Addicted to Slayers or Slayr's, have more than one. Probably enjoy the mechanical side of archery the best. I have really enjoyed the articles and the stories on this site. I strive to help others with what little knowledge I have.

  3. #3
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    82
    Post Thanks / Like

    Default

    Quote Originally Posted by mxtuner1 View Post
    Interesting reading on your request. Did not know of any Martin bows that came with Barnsdales AND Nitrous cams. The only ones I know of were conversions and they had to sand the inside of the limbs (Yikes!!!) to get the cams to fit. The standard limbs with the nitrous cams all had square tips on the riser end, the Barnsdales had round tips on the riser ends and were narrower and did not fit the pockets very well without slopping around.
    I will have to sand my limbs to make them fit. They are going on a Warthog project I've been working on. I mocked it up with Elite Archery EFX cams, but stumbled on to the Nitrous cams I just bought so it's a shoot through for me!!

  4. #4
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    82
    Post Thanks / Like

    Default

    Please close. Found some mods as well as a riser and limbs.... Guess I'm building a Slayer!

  5. #5
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,951
    Post Thanks / Like

    Default

    As you can see by my signature, I'm pretty fond of Slayers, both of mine are shoot-thru, and I hunt with the 63#er. Super easy to tune, has to be if I can do it! Lol! Once you become accustomed to loading the arrow from the front, it'll become second nature.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  6. #6
    Senior Member
    Join Date
    Feb 2012
    Location
    Nebraska
    Posts
    226
    Post Thanks / Like

    Default

    And once again MBXXX comes through for a Martin shooter! Great guy!
    Addicted to Slayers or Slayr's, have more than one. Probably enjoy the mechanical side of archery the best. I have really enjoyed the articles and the stories on this site. I strive to help others with what little knowledge I have.

  7. #7
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    82
    Post Thanks / Like

    Default

    It seems kind of sad to me that I'm just now discovering what you all have known for YEARS!! I'm just glad there are guys like Mark, Barry and Hutch around that will give a lesson or two to a punk kid like me... Heck even show a little charity and sell stuff out of their personal stash... Happy to be here!

    All I can say is I'm looking forward to my first shoot through! I thought I was hopelessly addicted to archery before.... it seems to be getting worse! ;-)

  8. #8
    Super Moderator Arrow Splitter's Avatar
    Join Date
    Oct 2010
    Location
    Gilmanton, NH, United States
    Posts
    3,816
    Post Thanks / Like

    Default

    ***Thread Closed per OP***

    A.S
    2011 Martin Firecat 400/NAP Apache Dropaway/Truglo Xtreme Sight/Custom 8" Stabilizer/Victory V6 Arrows
    2007 Martin Jaguar /Trophy Taker Dropaway/Extreme Sight/Custom 21" Stabilizer/Victory V6 Arrows
    Bow String Depot, Custom String Builders email us @ bowstringdepot@gmail.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •