Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Nemesis Draw length and cams

  1. #1
    Junior Member
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like

    Question Nemesis Draw length and cams

    I bought a Nemesis online for my daughter it said draw length was supposed to be 26-29 but the specs are actually 28-30 the string
    is 58 and the cable is 39 3/4. I saw on the spec charts i got the nitro 3Ls when it should have been the 3s now are they different cams or
    are they the same cams with different modules? If the cams are different can i change the string and cables and what size would i need to go to to get
    it down to 26 1/2 inch draw

  2. #2
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,765
    Post Thanks / Like

    Default

    Welcome to the MTF, they are different cams. One is a 3s and the other 3L, older Nemesis has 1.5 or 2.0. You would need to get 3s or 1.5 depending on the year of your bow.


    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  3. #3
    Junior Member
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like

    Default

    is there a way it could be short strung to the draw i need. It does have the nitro 3 cams.

  4. #4
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,765
    Post Thanks / Like

    Default

    As a string builder I have short strung bows. it works great depending how short you need to make it. Shortening the string will the let off and the poundage.

    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  5. #5
    Senior Member TEN RING's Avatar
    Join Date
    Dec 2011
    Location
    western PA
    Posts
    852
    Post Thanks / Like

    Default

    how short do you need to go if you trying to get down to 27 the answer would be go for it, more than that get the right cams
    MARTIN BENGAL
    THE NEED FOR SPEED
    WALMART PRO STAFF SHOOTER

  6. #6
    Junior Member
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like

    Default

    thanks for the info so far I am hoping to get to 26 1/2 by doing strings and cables but 27 would do. What would the string and cable lengths be? If we have to change cams you would also have to change the strings and cables correct? The bow is a 45-60 lbs I'm not to worried about losing poundage because she is shooting at about 50lbs now

  7. #7
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,765
    Post Thanks / Like

    Default

    First things first what year bow are we taking about. On the bottom limb should be a sticker the serial has the year its the first 2 digits. Also need the to know what module is it a built in or replaceable mod.


    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  8. #8
    Junior Member
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like

    Default

    the sticker with the serial number is not on the limb. the other sticker info is draw weight 45-60, draw length is 28-31 split string 39 3/4 shooting string is 58 , m56 brace 7 inches ata 35 inches. the limbs say martin x4 mag twin rytera series nitro 3 cams and it has replaceable mods i hope that helps. that is all the info i can find on the bow

  9. #9
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,765
    Post Thanks / Like

    Default

    So its 2013 the mod would have to be set at its lowest point and then decide how short of a string and cable.


    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  10. #10
    Junior Member
    Join Date
    Jan 2014
    Posts
    7
    Post Thanks / Like

    Default

    how do you figure out what size string and cables i need to get it to 26 1/2 or 27 ? do i need to call martin to get that information

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •