Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Broken mods?

  1. #1
    Senior Member GB3YO's Avatar
    Join Date
    Apr 2013
    Posts
    313
    Post Thanks / Like

    Default Broken mods?

    IMG_20140203_111207_124.jpg
    So I was shootn today and heard a creak when I drew my bow let down and looked it over found that my mods r cracked this is a first for me. Has anyone else have this happen? Will martin replace them or should I just order a pair . I left a message at cs waiting for call back. Also what would have caused this any suggestions oh and these r my draw mods for my cougar
    Last edited by GB3YO; 02-03-2014 at 12:35 PM.
    2013 Martin Onza Xt
    2012 Martin Cougar Fc
    2011 Martin Ridge Hunter turned Silencer
    2006 Martin Cougar 4se
    Fred Bear Grizzly @ 45lbs and Shakespear wonderbow @ 50lbs
    Love bows and everything bout bow hunting!!!

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,622
    Post Thanks / Like

    Default

    They should be covered under warranty so I'd wait for a phone call back
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  3. #3
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    97
    Post Thanks / Like

    Default

    Too bad those are all nice and dipped up! Oh well, as long as you get the parts you need.

  4. #4
    Senior Member EnglishKev's Avatar
    Join Date
    Mar 2011
    Location
    Devon, England
    Posts
    109
    Post Thanks / Like

    Default

    Not the first time I've seen this.

    http://martinarchery.com/mtechforum/...-Got-a-problem

    I had the same happen on an AlienX about 18 months ago, right on the corner of the mod.
    Martin replaced them no problem.

    http://martinarchery.com/mtechforum/...thanks-to-Joel

    Still have the bow, no issues since.

    Kev
    2009 AlienX
    2009 AlienX (not a misprint, I have two)
    2010 AlienX
    I have other bows as well

  5. #5
    Senior Member
    Join Date
    May 2012
    Location
    Canada
    Posts
    112
    Post Thanks / Like

    Default

    I'm also having an issue with one of my modules on my scepter, the threading for one of the screws has eroded somehow and won't hold anymore. I will also have to get a new one. So a call to customer service?
    Durandal
    Scepter V
    53.4 # 29.5 DL
    Victory HV Arrows
    Finger Shooter "Instinctive"

  6. #6
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,622
    Post Thanks / Like

    Default

    Quote Originally Posted by Durandal View Post
    I'm also having an issue with one of my modules on my scepter, the threading for one of the screws has eroded somehow and won't hold anymore. I will also have to get a new one. So a call to customer service?
    Are you sure it's the screw and not the threads in cam? Try threading one of the other screws into the same hole to make sure it's not the cam. If it's the cam then best bet is a call to the warranty dept. NOW, screws are pretty easy to find. Any good hardware store or Fastenal will have screws. They are 8x32x 3/8"long countersunk. Take the old one along if you go looking.
    If You're Not Living on the Edge You're Taking Up Too Much Space
    Martin Gold Plus Staff Shooter
    Alien Mafia
    PSAA Life member, UBP Life member
    PADI AOW Diver

  7. #7
    Super Moderator Arrow Splitter's Avatar
    Join Date
    Oct 2010
    Location
    Gilmanton, NH, United States
    Posts
    3,571
    Post Thanks / Like

    Default

    Quote Originally Posted by Durandal View Post
    I'm also having an issue with one of my modules on my scepter, the threading for one of the screws has eroded somehow and won't hold anymore. I will also have to get a new one. So a call to customer service?
    Correct.

    A.S

    **EDIT** Barry beat me to the answer.
    Last edited by Arrow Splitter; 02-05-2014 at 03:13 PM.
    2011 Martin Firecat 400/NAP Apache Dropaway/Truglo Xtreme Sight/Custom 8" Stabilizer/Victory V6 Arrows
    2007 Martin Jaguar /Trophy Taker Dropaway/Extreme Sight/Custom 21" Stabilizer/Victory V6 Arrows
    Bow String Depot, Custom String Builders email us @ bowstringdepot@gmail.com

  8. #8
    Senior Member
    Join Date
    May 2012
    Location
    Canada
    Posts
    112
    Post Thanks / Like

    Default

    Quote Originally Posted by Arrow Splitter View Post
    Correct.

    A.S

    **EDIT** Barry beat me to the answer.
    It is the threading of the module that looks eroded, the cam looks ok but I will check with other screw. Is it safe to remove a screw from the other cam with that one already out? Obviously I wont' try to draw it like that

    Hope it's not the cam.....
    Durandal
    Scepter V
    53.4 # 29.5 DL
    Victory HV Arrows
    Finger Shooter "Instinctive"

  9. #9
    Senior Member GB3YO's Avatar
    Join Date
    Apr 2013
    Posts
    313
    Post Thanks / Like

    Default

    none of my bows have threads on the cams just the module and yes u can remove both mods just dont draw your bow of course
    2013 Martin Onza Xt
    2012 Martin Cougar Fc
    2011 Martin Ridge Hunter turned Silencer
    2006 Martin Cougar 4se
    Fred Bear Grizzly @ 45lbs and Shakespear wonderbow @ 50lbs
    Love bows and everything bout bow hunting!!!

  10. #10
    Senior Member wscywabbit's Avatar
    Join Date
    Nov 2008
    Location
    Sultan, WA
    Posts
    1,574
    Post Thanks / Like

    Default

    Quote Originally Posted by Durandal View Post
    It is the threading of the module that looks eroded, the cam looks ok but I will check with other screw. Is it safe to remove a screw from the other cam with that one already out? Obviously I wont' try to draw it like that

    Hope it's not the cam.....
    As long as you don't draw, it would be fine.... and remember to put it back
    In God and guns we trust;
    • One nation, under God, indivisible, with liberty and justice for all.
    • A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.


    2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
    2005 Saber: 70#, same arrow, 250 fps

  11. Likes Arrow Splitter liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •