Results 1 to 8 of 8

Thread: PowerTough limbs?

  1. #1
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    90
    Post Thanks / Like

    Default PowerTough limbs?

    Here is a picture of a pair of limbs I just bought. Note the 2HP but also note the width at the fork. Also takes an earlier style RotoCup... I just happen to have a set that Martin sent by mistake.
    ImageUploadedByTapatalk1392260743.904791.jpg
    Pictured with these limbs are a set if Barnesdales that I have.
    ImageUploadedByTapatalk1392260789.112234.jpgImageUploadedByTapatalk1392260799.207096.jpgImageUploadedByTapatalk1392260814.931604.jpgImageUploadedByTapatalk1392260832.213372.jpg

  2. #2
    Senior Member wscywabbit's Avatar
    Join Date
    Nov 2008
    Location
    Sultan, WA
    Posts
    1,575
    Post Thanks / Like

    Default

    Looks like Powertuff to me... probably first generation. Good find assuming they're in good condition.
    In God and guns we trust;
    • One nation, under God, indivisible, with liberty and justice for all.
    • A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.


    2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
    2005 Saber: 70#, same arrow, 250 fps

  3. #3
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    90
    Post Thanks / Like

    Default

    They're brand new, never been on a bow. The thing I like about them is that a Nitrous cam fits just fine with no sanding!

  4. #4
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,794
    Post Thanks / Like

    Default

    Quote Originally Posted by Powerlineman83 View Post
    They're brand new, never been on a bow. The thing I like about them is that a Nitrous cam fits just fine with no sanding!
    Got a set of B Nitrous that you plan on using? The 2H should be a good match for Bs. What riser are you thinking of?
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  5. #5
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    90
    Post Thanks / Like

    Default

    They'd be Cs. Either on a Warthog or an Onza XT

  6. #6
    Senior Member ElkSlayer's Avatar
    Join Date
    Feb 2010
    Location
    Oregon
    Posts
    1,032
    Post Thanks / Like

    Default

    post up some pic's when your done ...or befor you get it done ..lol.. were waiting on limbs and cams and string and we can put the new rebuilt cougar III for my son together... come on USPS
    It's all fun an games till you put that big boy on the ground.. now its time to get to work
    Martin cougarIII elite nitrous C cam X system & HHA
    Darton Fury recurve

    http://www.cascadianbowmen.org/

  7. #7
    Senior Member GB3YO's Avatar
    Join Date
    Apr 2013
    Posts
    293
    Post Thanks / Like

    Default

    i think you might have to use the warthog cause those roto cups wont work unless there is a pin in the riser gotta have some lateral control in the cup and the new cups wont fit the limbs. You could sand the new style cups so the limb would fit . Interested in what you come up with tho
    Last edited by GB3YO; 02-13-2014 at 12:26 PM.
    2013 Martin Onza Xt
    2012 Martin Cougar Fc
    2011 Martin Ridge Hunter turned Silencer
    2006 Martin Cougar 4se
    Fred Bear Grizzly @ 45lbs and Shakespear wonderbow @ 50lbs
    Love bows and everything bout bow hunting!!!

  8. #8
    Member Powerlineman83's Avatar
    Join Date
    Oct 2013
    Location
    Iowa
    Posts
    90
    Post Thanks / Like

    Default

    Thanks for the comments fellas! I'm not sure what direction to go. I'm leaning towards trying the Warthog riser because it's already apart. I like the way the Onza shoots now and don't really want to mess with it.... but that can change in an instant!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •