Results 1 to 5 of 5

Thread: Blade 4X what are the string issues

  1. #1
    Junior Member Bigmike1461's Avatar
    Join Date
    Feb 2014
    Posts
    8
    Post Thanks / Like

    Default Blade 4X what are the string issues

    I am looking at getting the 2013 Blade 4X ,but I have seen some post about the strings not holding up is there a flaw in the system or is there a flaw in the string???? Any help will help me out...thanks

  2. #2
    Senior Member GB3YO's Avatar
    Join Date
    Apr 2013
    Posts
    287
    Post Thanks / Like

    Default

    improper set up strings r good
    2013 Martin Onza Xt
    2012 Martin Cougar Fc
    2011 Martin Ridge Hunter turned Silencer
    2006 Martin Cougar 4se
    Fred Bear Grizzly @ 45lbs and Shakespear wonderbow @ 50lbs
    Love bows and everything bout bow hunting!!!

  3. #3
    Senior Member droppixel's Avatar
    Join Date
    Apr 2011
    Location
    Plano, IL
    Posts
    1,623
    Post Thanks / Like

    Default

    Yep, over rotating the Fury XT will cause early serving wear. Need to make sure the limb stop is set properly and you will be fine.
    2014 Lithium :: 2007 Cheetah :: Jaguar Take-down
    REAL AVID Field Staff / Bucks and Beards Scents Field Staff

  4. #4
    String builder/ Super Moderator Hutch~n~Son Archery's Avatar
    Join Date
    Aug 2009
    Location
    Gilmanton, New Hampshire
    Posts
    5,765
    Post Thanks / Like

    Default

    Yep!! X3 on the above advice!!


    Hutch
    Bow String Depot Custom String Builders
    Need a string set pm or email me @ bowstringdepot@gmail.com
    or check us out @ http://bowstringdepot.com

  5. #5
    Super Moderator FishingandHuntingUSA's Avatar
    Join Date
    Dec 2013
    Posts
    224
    Post Thanks / Like

    Default

    Quote Originally Posted by droppixel View Post
    Yep, over rotating the Fury XT will cause early serving wear. Need to make sure the limb stop is set properly and you will be fine.
    I think the limb stop is probably the most miss used but most important part of the set up.
    There are many people who think you just set the draw length and you are good.
    That limb stop can be adjusted to give you a solid back wall or if you back it off a bit which is what I like you have a little be of room
    and the back. I have also heard people say it does not fell like it has 80% let off and it's because they did not set the limb stop and it
    was stopping short.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •