Results 1 to 5 of 5

Thread: Does anyone have a good detailed picture of Pantera Series 7000 wood inlay

  1. #1
    Junior Member
    Join Date
    May 2014
    Posts
    3
    Post Thanks / Like

    Default Does anyone have a good detailed picture of Pantera Series 7000 wood inlay

    I need a very clear detailed picture of the wood riser inlay on a Martin Pantera Series 7000 to get a reproduction made. If anyone can help me out with this, it would be greatly appreciated.

    Thank you.

  2. #2
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,792
    Post Thanks / Like

    Default

    It may be difficult to get a detailed pic of the inlay, as that is a fairly old bow, a late 80's early 90's era bow, I did find another post on a Pantera Series 7000 from Jan., 2013, it does have a photo of the riser section your looking for, but unfortunatly, its somewhat blurry. Maybe Badge 56 is still lurking and will help out. He was last active Feb, 2013. Welcome to the site and good luck in your quest!
    Last edited by elkslayer4x5; 05-24-2014 at 04:52 PM.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  3. #3
    Junior Member
    Join Date
    May 2014
    Posts
    3
    Post Thanks / Like

    Default

    Thanks man. I appreciate your input. I did see the post you are speaking of, but unfortunately the picture quality is not quite good enough. I may have to end up drawing something up myself.
    Thanks again.

  4. #4
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,792
    Post Thanks / Like

    Default

    There are quite a few folks that have similar Martin bows, I had an old Lynx that had a carved wood panel like your talking about, keep checking back, and I'm sure that one of these guys will post a suitable pic for you.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  5. #5
    Junior Member
    Join Date
    May 2014
    Posts
    3
    Post Thanks / Like

    Default

    Thank you again, elkslayer4x5. I really appreciate it a lot.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •