Results 1 to 3 of 3

Thread: Cable Slide Rod ??

  1. #1
    MarkFrantz
    Guest

    Default Cable Slide Rod ??

    I changed to some different brand parts on my Cheetah after my strings granaded at full draw , now i have a Vane clearance problem at my strings , i cant move my slide rod over any further because it hits my rest bracket , my question is if i turn my slide rod upward it gives me plenty of clearance , will turning the rod upward cause any problems ?

  2. #2
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    1,983
    Post Thanks / Like

    Default

    Turning the rod upwards is possible but will lead to cam-lean at the upper cam (or is this a 1-Cam? In this case it will lead to Wheel-lean. xD).
    (2) Martin ShadowCat 2010

  3. #3
    cb671
    Guest

    Default

    I believe both the up and down position will give alil cam/wheel lean...I alway's have my offset cable rod just clear enough of the fletching to where it will not interfere(Cock Fletch Down is how I place my arrow's). Cock Fletch out will give you more vane clearance with the least amount of angle on your cable rod since your vane will be facing up at an angle rather than directly Right or Left to your string.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •