Results 1 to 2 of 2

Thread: Dreamcatcher

  1. #1

    Default Dreamcatcher

    I just received a new Dreamcatcher recurve and have a few question about set up, if anyone knows. First, deals with arrow alignment. Should I use a thick striker plate or just seal skin on rolling up from the shelf? I shoot from the shelf.

    Second also deals with arrow alignment. What is the ideal nocking point if I shoot three finger under rather than split finger?

  2. #2
    Member stickflngr's Avatar
    Join Date
    Mar 2008
    Post Thanks / Like


    Hi there,

    On my Shelf I use deer hide but Ive used seal skin in the past, Either will work. The one thing I do on the shelf before I cover it is to take a 3/8" piece of of boot lace and glue it in the middle of the shelf about an 1/8" from the side to have a litte fletch clearance.

    As for shooting 3 under, I would start at an 1/8 above zero and move a 1/16" up until you get good arrow flight. Congrats on the new bow. Kenny

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts