Results 1 to 5 of 5

Thread: Martin S4 configuration?

  1. #1
    Martinju
    Guest

    Default Martin S4 configuration?

    I'm probably going to get a Martin S4 from my pro dealer. I saw the bow and the specs on the website. Do the furious cams have a draw stop? If not, I'd like to get the m pro cams on the bow, but I would like to have the same riser and limbs as with the furious cams so its more forgiving than the mag S4 model. What would the specs of the bow be (ATA, brace height) ... if it is even possible?
    Thanks!

  2. #2
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,004
    Post Thanks / Like

    Default

    The Furious-Cams do NOT have an 'active' draw stop like you can get with the MPro-Cam. But with the Furious-Cams you will still get a solid wall caused by the modules that will be set for your perfect draw length
    (2) Hoyt PCEXL

  3. #3
    dbd870
    Guest

    Default

    You might go over on archerytalk and ask LeEarl if he has any info.

  4. #4
    Stormbringer
    Guest

    Default

    With precise DL adjustment capabilitys, when the Furious cams roll over to the cables, that provides the "Wall"...at least that's the way it happens on my '07 Nitrous X powered, Scepter IV Elite!

    (no draw stop required!)
    ________
    volcano review
    Last edited by Stormbringer; 01-26-2011 at 08:37 AM.

  5. #5
    Senior Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    2,004
    Post Thanks / Like

    Default

    It is the same with Nitrous and Furious, both use the same modules with 'wall included'
    (2) Hoyt PCEXL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •