I was going to reply to one of the other threads, but it wouldn't let me.
I just purchased a slightly used 2008 Martin Slayer on Ebay. It seems to be shooting fine and I am in the process of fine tuning it. One thing that bothers me a little is how much the limbs show when they are tightened down all the way. On my magcat, the ends of limbs by the nut would not be visible at all after tightening them down. On my Slayer, almost all of the end of the limb is visible. What's worse is that they are not equally visible.
I've measured the tiller and they are very close. The limbs say 3H on them. Here's a link to some pictures of my bow: http://picasaweb.google.com/plemmons...ayerExtremePro