Results 1 to 6 of 6

Thread: firecat prox

  1. #1
    rob
    Guest

    Default firecat prox

    I have a firecat pro 70# 28" bow. i have a metal to metal sound around the riser(i think). I pulled the sights off and changed the rest to see if that would fix it but it did not. has anybody had this sound on their firecat. the bow shoots very very good. it just has that sound.

  2. #2
    Aim4gold
    Guest

    Default

    Are you shooting near the bottom of your poundage range? Bows set to there lowest poundage can make sounds?

    Pluck your string like a guitar - sometimes that will help find it?
    Are you sure all the nuts/bolts on your attachemts are tight, like a pin guard
    Is your quiver attached?

  3. #3
    Senior Member bowgramp59's Avatar
    Join Date
    Sep 2008
    Location
    vernon texas
    Posts
    505
    Post Thanks / Like

    Default

    check your limbs
    curtis

    2010 nemesis camo, 2011 nemesis carbon fiber,
    2010 onza 3 camo,

  4. #4
    rob
    Guest

    Default

    everything is tight and its on 70#with is the top of my range. no quiver or sights and i changed the rest.

  5. #5
    goinhtn63
    Guest

    Default

    Check your lower limb right at the black pivot. I have busted 3 limbs at that spot and it made a creaking noise before it broke.

  6. #6
    cmherrmann
    Guest

    Default

    Check to see if you cables are touching the draw modules. All that have to do is barely touch the module and you will get a metallic twang,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •